GE JVM3160RFSS Installation Instructions - Page 16

Installation Instructions B OUTSIDE TOP EXHAUST 9HUWLFDO'XFW INSTALLATION OVERVIEW B1. Attach Mounting Plate to Wall B2. Prepare Top Cabinet B3. Adjust Blower Motor B4. Install Exhaust Adaptor B5. Mount Microwave Oven B6. Adjust Exhaust Adaptor B7. Connect Ductwork Convenience Cooking Popcorn Beverage Potato Reheat Defrost Weight/Time Cook Time Express Cook 12 3 45 6 78 9 Power Level 0 Set Clock Timer On/Off Add 30 Sec. Turntable Surface Light Vent Cancel Off Start Pause B1 ATTACH THE MOUNTING PLATE TO THE WALL A B 7RXVHWRJJOHEROWV: Mounting Plate Spacing for Toggles More Than Wall Thickness Toggle Wings Toggle Bolt C D Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud. Recommended locations on the mounting plate are indicated by A, B, C and D. 1 Remove the toggle wings from the bolts. 2 Insert the bolts into the mounting plate through the holes designated to go into drywall and reattach the toggle wings to 3ø4s onto each bolt. Wall Mounting Plate Bolt End 3 Insert the toggle wings into the holes in the wall and place the mounting plate against the wall. NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the mounting plate touch the bottom of the cabinet when pushed flush against the wall and that the plate is properly centered under the cabinet. CAUTION: %HFDUHIXOWRDYRLGSLQFKLQJ ILQJHUVEHWZHHQWKHEDFNRIWKHPRXQWLQJSODWHDQG the wall. 4 Tighten all bolts. Pull the plate away from the wall to help tighten the bolts. 16