GE JVM3160RFSS Installation Instructions - Page 13

Installation Instructions A RECIRCULATING 1RQ9HQWHG'XFWOHVV INSTALLATION OVERVIEW A1. Attach Mounting Plate to Wall A2. Prepare Top Cabinet A3. Install Charcoal Filter (Supplied with AVM4160 and JVM3160 models) A4. Mount the microwave oven A5. Installing/Replacing the Charcoal Filter Without Access to Top Screws and the Unit Has Already Been Mounted. Convenience Cooking Popcorn Beverage Potato Reheat Defrost Weight/Time Cook Time Express Cook 12 3 45 6 78 9 Timer On/Off Add 30 Sec. Turntable Surface Light Set Vent Power 0 Clock Level Cancel Off Start Pause A1 ATTACH THE MOUNTING PLATE TO THE WALL 3 Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to mount the plate. NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the mounting plate touch the bottom of the cabinet or the horizontal level line when pushed flush against the wall and that the plate is properly centered under the cabinet. Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud. 1 Remove the toggle wings from the bolts. 2 Insert the bolts into the mounting plate through the holes designated to go into drywall and reattach the toggle wings to 3ø4s onto each bolt. 7RXVHWRJJOHEROWV: CAUTION:%HFDUHIXOWRDYRLGSLQFKLQJ ILQJHUVEHWZHHQWKHEDFNRIWKHPRXQWLQJSODWHDQG the wall. 4 Tighten all bolts. Pull the plate away from the wall to help tighten the bolts. A2 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET You need to drill holes for the top support screws and a hole large enough for the power cord to fit through. Mounting Plate Spacing for Toggles More Than Wall Thickness Toggle Wings Toggle Bolt Wall Bolt End ‡ Read the instructions on the TOP CABINET TEMPLATE. ‡ Tape it underneath the top cabinet. ‡ Drill the holes, following the instructions on the TOP CABINET TEMPLATE. CAUTION::HDUVDIHW\JRJJOHVZKHQ GULOOLQJKROHVLQWKHFDELQHWERWWRP 13