GE JX1830SB Installation Instructions - Page 2
Installation Instructions
View all GE JX1830SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Installation Instructions 1. CUTOUT DIMENSIONS Models 27″ 30″ Height 163⁄4″ 163⁄4″ Width 251⁄2″ 251⁄2″ Depth (min.)* 191⁄2″ or 22″ 191⁄2″ or 22″ * Min. depth with receptacle outside cabinet 191⁄2″ Min. depth with receptacle inside cabinet 22″ Depth 2. INSTALL BOTTOM BRACKET AND BOTTOM DUCT A Disconnect the microwave oven before proceeding with the installation. B Fasten the bottom bracket to the bottom duct by using two 1⁄2″ screws. Front Rear Width Height 3″ Min. On 27″ models, allow 1″ at the top, 11⁄16″ on the sides and 13⁄8″ at the bottom for overlap of the Trim Frame over the edges of the cutout. On 30″ models, allow 1″ at the top, 23⁄16″ on the sides and 13⁄8″ at the bottom for overlap of the Trim Frame over the edges of the cutout. 1⁄2″ Screws (2) C Remove any loose items inside the microwave oven, including the turntable and turntable support. Carefully turn the microwave upside down. D Install bottom duct with four 1⁄2″ screws as shown. Screws Screws Microwave Oven Upside Down 2