GE JX1830SB Installation Instructions - Page 4
Installing The Trim Frame, Replace Any Loose Items - trim kit
View all GE JX1830SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Installation Instructions 5. INSTALL MICROWAVE OVEN INTO CABINET A Slide the microwave oven part way into the cabinet opening. Bottom Duct Anti-Tip Assembly Anti-Tip Bracket 1⁄2″ Screw Bottom Bracket B Plug in the microwave oven. C Bottom bracket must be flat to the cutout floor to engage correctly with the anti-tip bracket as shown. Carefully slide the microwave back, making sure the power cord is not mashed or cut. D Center the microwave oven within the cutout opening and slide the microwave oven in place, engaging the anti-tip bracket. E Ensure the microwave oven is accurately centered. 6. INSTALLING THE TRIM FRAME A Place the trim frame over the microwave oven. B Make sure the trim frame is level and the microwave oven is centered within the trim frame. Mark four center positions through the four mounting holes of the trim frame. NOTE: Center the trim frame equally on all four sides. C Remove the trim frame and drill four pilot holes. Pilot Hole Cutout Opening 1″ Screw Trim Frame Mounting Hole D Attach the trim frame by using four screws. Cutout Opening 1⁄2″ Screw Positioning Flange F Drill pilot holes through the positioning flange and then install three 1⁄2″ screws at the front of the bottom duct as shown. 7. REPLACE ANY LOOSE ITEMS A Your trim kit is now fully installed. Replace any loose items that were removed from the inside of the microwave oven. B Keep these installation instructions for future reference. C Replace house fuse or close circuit breaker. Part No. 245B1790P075 Pub. No. 31-20936-1 3828W5U0053 12-00 JR 4 Printed in Korea