GE PB978SPSS Use and Care Manual - Page 43

Glass surface-potential for permanent damage

Page 43 highlights

 GEAppliances.com Metal Marks and Scratches Be careful not to slide pots and pans across your cooktop. It will leave metal markings on the cooktop surface. These marks are removable using the CERAMA BRYTE® Ceramic Cooktop Cleaner with the CERAMA BRYTE® Cleaning Pad for Ceramic Cooktops. If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent. NOTE: Carefully check the bottom of pans for roughness that would scratch the cooktop. Cooktop Seal To clean the cooktop seal around the edges of the glass, lay a wet cloth on it for a few minutes, then wipe clean with nonabrasive cleaners. Glass surface-potential for permanent damage. Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting of the surface of your cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when removing hot substances. Be sure to use a new, sharp razor scraper. Do not use a dull or nicked blade. Damage from Sugary Spills and Melted Plastic Turn off all surface units. Remove hot pans. W earing an oven mitt: a. Use a single-edge razor blade scraper (CERAMA BRYTE® Ceramic Cooktop Scraper) to move the spill to a cool area on the cooktop. b. Remove the spill with paper towels. Any remaining spillover should be left until the surface of the cooktop has cooled. Don't use the surface units again until all of the residue has been completely removed. NOTE: If pitting or indentation in the glass surface has already occurred, the cooktop glass will have to be replaced. In this case, service will be necessary. To Order Parts To order CERAMA BRYTE® Ceramic Cooktop Cleaner and the cooktop scraper, please call our toll-free number: National Parts Center 800.626.2002 CERAMA BRYTE ® Ceramic Cooktop Cleaner WX10X300 CERAMA BRYTE® Ceramic Cooktop Scraper WX10X0302 Kit WB64X5027 (Kit includes cream and cooktop scraper) CERAMA BRYTE® Cleaning Pads for Ceramic Cooktops WX10X350 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

GEAppliances.com
To order CERAMA BRYTE
®
Ceramic Cooktop
Cleaner and the cooktop scraper, please call
our toll-free number:
National Parts Center
800.626.2002
CERAMA BRYTE
®
Ceramic
Cooktop Cleaner
°°°°°°°°°°
#WX10X300
CERAMA BRYTE
®
Ceramic
Cooktop Scraper
°°°°°°°°°°
#
WX10X0302
Kit
°°°°°°°°°°°°°°°°°°°°°°°°
#WB64X5027
(Kit includes cream and cooktop scraper)
CERAMA BRYTE
®
Cleaning Pads for
Ceramic Cooktops
°°°°°°°
#WX10X350
Turn off all surface units° Remove hot
pans°
Wearing an oven mitt:
a.
Use a single-edge razor blade
scraper (CERAMA BRYTE
®
Ceramic
Cooktop Scraper) to move the spill to
a cool area on the cooktop°
b.
Remove the spill with paper towels°
Any remaining spillover should be left
until the surface of the cooktop has
cooled°
Don’t use the surface units again until
all of the residue has been completely
removed°
NOTE:
If pitting or indentation in the glass
surface has already occurred, the cooktop
glass will have to be replaced. In this case,
service will be necessary.
Damage from Sugary Spills and Melted Plastic
Sugary spillovers (such
as jellies, fudge, candy,
syrups) or melted plastics
can cause pitting of the
surface of your cooktop (not
covered by the warranty)
unless the spill is removed
while still hot. Special care
should be taken when
removing hot substances.
Be sure to use a new, sharp
razor scraper.
Do not use a dull or nicked
blade.
Be careful not to slide pots and pans
across your cooktop° It will leave metal
markings on the cooktop surface°
These marks are removable using the
CERAMA BRYTE
®
Ceramic Cooktop Cleaner
with the CERAMA BRYTE
®
Cleaning Pad
for Ceramic Cooktops°
If pots with a thin overlay of aluminum
or copper are allowed to boil dry, the
overlay may leave black discoloration
on the cooktop°
This should be removed immediately
before heating again or the
discoloration may be permanent°
NOTE:
Carefully check the bottom of pans for
roughness that would scratch the cooktop.
Metal Marks and Scratches
To Order Parts
Glass surface—potential for permanent damage
.
To clean the cooktop seal around the edges
of the glass, lay a wet cloth on it for a few
minutes, then wipe clean with nonabrasive
cleaners°
Cooktop Seal
43