GE PDW7800P Owners Manual - Page 4
About the dishwasher control panel., Control Settings - lighting
View all GE PDW7800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Safety Instructions About the dishwasher control panel. You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model. 1 6 Operating Instructions Troubleshooting Tips 3 5 4 2 Control Settings 1 Status Indicator Lights The Status display tells you what's happening while the dishwasher is in operation and may flash, indicating a malfunction (see page 6). The lights will come ON indicating the sequence of operation the dishwasher is in. LOW DETERGENT Displayed when the SmartDispenseTM needs to be refilled with liquid or gel automatic dishwasher (on some models) detergent. SENSING Displayed while the ExtraClean™ Sensor is measuring the amount of soil and temperature of water. The dishwasher will adjust the selected cycle to achieve optimal performance. WASHING Displayed during prewash and main wash periods. RINSING Displayed during rinse periods. DRYING Displayed during HEATED DRY. SANITIZED Displayed when cycle has met sanitization conditions. Light remains ON until door is opened. CLEAN Displayed when a wash cycle is complete. 2 Time Remaining Display (on some models) During operation, the display shows the minutes remaining until the cycle is complete. The display may adjust the remaining time while the Sensing light is on. The time displayed at the start of each cycle may change from the factory setting as the unit customizes itself to home use. During a delay start, the display will show hours of time remaining until the cycle starts. 3 Selections Press the pad for the desired wash cycle. NOTE: All cycle times and water usage information contained in the following section are approximate values only. Actual results will depend on several factors, including but not limited to, inlet temperature, household water pressure and turbidity of the wash water. The light above or next to the selected pad will be ON to indicate which WASH CYCLE has been selected. ANTI-BACTERIA Heavy 8.8 gallons (33.3 litres), 105 minutes Medium 7.5 gallons (28.4 litres), 95 minutes Light 6.3 gallons (23.8 litres), 85 minutes This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle length will vary depending on the temperature of your inlet water. NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is interrupted during or after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the sanitized light will not illuminate at the end of the cycle. NOTE: NSF-certified residential dishwashers are not intended for licensed food establishments. COOKWARE (POTS & PANS) NORMAL WASH Heavy 10.0 gallons (37.9 litres), 80 minutes Medium 8.8 gallons (33.3 litres), 70 minutes Light 7.5 gallons (28.4 litres), 60 minutes This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle. 5.0-8.8 gallons (18.9-33.3 litres), 47-90 minutes This cycle is for medium/heavily soiled dishes and glassware. Cycle time and water usage are approximate values. Results will depend on several factors, including but not limited to inlet temperature, household water pressure and amount of soil in the wash water. 4 Consumer Support