GE PDWF2 Installation Instructions - Page 11
SLIDE, DISHWASHER, FINAL, POSITION, Special, Considerations, Positioning, Mount, Control, Models,
View all GE PDWF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Dishwasher Installation STEP 13 - SLIDE DISHWASHER INTO FINAL POSITION • Push the dishwasher the rest of the way into the cabinet. • Push the sides with your hands. Do not push the dishwasher with your knee, as this will damage the door. • Check that the tub insulation blanket does not get "bunched-up" or interfere with the springs as you slide it into the cabinet. • Center the dishwasher in the opening. • Front of door panel should be flush with face of cabinet. • Carefully open and close the door to ensure that the door panel does not catch or rub on the cabinet frame. Refer to Figure U below. • If the door catches or rubs on the frame, reposition and/or level the unit (see Step 14) until the door moves freely and does not contact the cabinet frame. Special Considerations for Positioning Top Mount Control Models The controls on these models are designed to be hidden by your countertop. Align the dishwasher as shown in Figure V. Leave a 1/2" minimum gap between the underside of the countertop and the top of the dishwasher door as shown in Figure W. Use the leveling legs to increase or decrease the amount of gap between the controls and the countertop. For flush installations of the PDW9700 Series models, it may be necessary to cut off the back panel of the tub insulation blanket so that the dishwasher door panel can be aligned with the kitchen cabinet panels. Door Fits and Swings Back Behind Cabinet Frame Correct Alignment Figure U Incorrect' Alignment Door Catches on Cabinet Frame IMPORTANT- Leave a 1/2" minimum gap between the controls and the underside of the countertop to prevent condensation and damage to the control panel from screwheads. Contro s Hidden by Countertop Figure V Countertop 1/2" Min. Dishwasher Door Figure W 11