GE PDWF2 Installation Instructions - Page 3
tallution, ration, losure
View all GE PDWF2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
n tallution Pr ration-.r losure PREPARE DISHWASHER ENCLOSURE A WARNING To reduce the risk of shock, fire, or injury to persons, the installer must ensure that the dishwasher is completely enclosed at the time of installation. • The rough cabinet opening must have a minimum width and depth of 24" and height of 34-1/2" ± 1/4" from the floor to the underside of the countertop. • The back wall should be free of pipes or wires. • Adjacent cabinets should be square and plumb to ensure a good fit. Refer to Figure A • For a corner installation, allow 2" minimum clearance between the dishwasher and the adjacent wall. • Provide at least 28-3/8" in front of the dishwasher to allow the dishwasher door to open fully. Refer to Figure B • The dishwasher must be installed no more than 10 feet from sink for proper drainage. • The dishwasher must be fully enclosed on the top, sides, and back. • The dishwasher must not support any part of the enclosure. Clearances: Countertop In a corner installation, provide at least 2" clearance between the dishwasher and the adjacent Dishwasher cabinet, wall, or other appliance. Provide at least 28-3/8" of clearance in front of the dishwasher. -r 28-3/8" Minimum 2" Minimum Figure B This Wall Area must be Free of Pipes or wires 34-1/2" ± 1/4" Underside of Countertop to Floor 5"-f- 4 24" 5' 4" Minimum 24" Minimum Cabinets Square 6" and Plumb Floor MUST be Even with Room Floor Plumbing and Electric Service Must Enter Shaded Area Figure A • Make sure the floor is level inside the opening and even with the finished floor of the kitchen. This will facilitate removal of the dishwasher at a later date for service, if needed. Special consideration for a dishwasher installed on a elevated platform The elevated platform must be flat and level. 3