GE PDWF2 Installation Instructions - Page 2

Installation Preparation PARTS SUPPLIED WITH INSTALLATION KIT: u Two #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop or sides of cabinets. u Junction box cover and #10-1/2" hex head screw u Side and top trim u Trim Panel Accessory Kit (not shown). Model PDW9700 only u Sound upgrade kit (some models) u Drain hose (78") , drain hose hanger and hose clamp u Literature, Product Samples and/or coupons u Hard water test strip (Models with Bulk Dispenser) Screw Kit I III #8 Phillips #10 Hex Head Special Head Screws J-Box Screw 5/8" long 1/2" long Trim Pieces Drain Hose Hanger Sound Upgrade Kit (Some Models) I Hard Water Test Strip (Models with Bulk Dispenser) ,siiVirer II MURftent , '4efflenr1);101,P ,, r`''' IO W' Drain Hose (78") Side Trim Side Trim Top Trim Junction Box Cover Hose Clamp MATERIALS YOU WILL NEED: u Ferrule, compression nut and 90° Elbow 13/8" NPT external thread on one end, opposite end sized to fit water supply) u Thread seal tape u UL Listed wire nuts (3) wags. O10 90° Elbow, Ferrule and Compression Nut Hand Shut-Off Valve Thread Seal Tape Wire Nuts (3) Materials For New Installations Only: u Air gap for drain hose, if required u Waste tee for house plumbing, if applicable u Electrical cable or power cord, if applicable u Screw type hose clamps u Strain relief for electrical connection u Hand shut-off valve u Water line 3/8" min. copper u Coupler for extending drain line, if applicable u GPF1OL 10' drain hose, if needed Hot Water Line Electrical Cable Waste Tee (or Power Cord, if applicable) GPF10L 10' Drain Hose 4-0.1,110- Air Screw Type Gap Hose Clamps Strain Relief Coupler TOOLS YOU WILL NEED: u Phillips head screwdriver u 1/4" and 5/16" nutdriver u 6" Adjustable wrench u Level u Carpenters square u Measuring tape u Safety glasses u Flashlight u Bucket to catch water when flushing the line u 15/16" socket u Gloves For New Installations Only: u Tubing cutter u Drill and appropriate bits u Hole saw set 2 Phillips Head Screwdriver 1/4" and 5/16" Nutdriver Level 0 1/4" and 15/16" Socket 6" Adjustable Wrench Tubing Cutter Carpenters Square Flashlight Safety Glasses Measuring Tape Gloves Bucket Hole Saw Set Drill and Bits