GE PGSS5PJY Owners Manual - Page 14
Replacing the Light Bulbs, Operating Instructions
View all GE PGSS5PJY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operating Instructions Safety Instructions Replacing the light bulbs. Turning the control to the 0 (off) position does not remove power to the light circuit. Refrigerator Lights For models with LED lights: An authorized technician will need to replace the LED light. For models with incandescent lights: CAUTION: Light bulbs may be hot. Unplug the refrigerator. To remove the light shield, grasp the shield at the back and pull out to release the tabs at the back. Rotate the shield down and then forward to release the tabs at the front of the shield. After replacing with an appliance bulb of the same or lower wattage, replace the shield. Plug the refrigerator back in. NOTE: Appliance bulbs may be ordered from GE Parts and Accessories, 800.626.2002. Light Shield Appearance may vary Freezer Light CAUTION: Light bulbs may be hot. Unplug the refrigerator. Remove the freezer basket for access. The bulb is located at the rear of the freezer inside a light shield. To remove, grasp the shield at the top and pull out to release the tabs at the bottom. After replacing with an appliance bulb of the same or lower wattage, replace the shield and freezer basket. Plug the refrigerator back in. Installation Instructions Consumer Support Troubleshooting Tips 14