GE PGSS5PJY Owners Manual - Page 24
Bottom Drawer, Cont., Remove The Upper Basket, Remove The Base Grille, Remove The Drawer Front
View all GE PGSS5PJY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation Instructions REMOVING THE FREEZER DRAWERS (cont.) The freezer drawers can be removed, if needed, to fit through tight areas. Read these instructions completely and carefully. BOTTOM DRAWER 1 REMOVE THE UPPER BASKET A Open the bottom freezer drawer until it stops. B Pull the basket out to the stop location. C Lift the basket up at the front to release it from the slides. D Lift the back up and out of the slide. A 2 REMOVE THE DRAWER FRONT FROM THE SLIDES A Remove the 10 hex head screws from the door and remove the door. B Set the drawer front on a non-scratching surface. C Push the rail assemblies back into the cabinet. REMOVE THE LOWER BASKET A Open the bottom freezer drawer until it stops. B Lift the rear of the basket up so the two rear alignment tabs are pulled out of the slide bracket. C Rotate the basket up and out of the drawer. 3 REMOVE THE BASE GRILLE (if needed) If, after removing the freezer drawers and refrigerator door, the refrigerator will still not fit through a doorway, the base grille can be removed. A Remove the base grille by removing the 2 Phillips-head screws. 24