GE PGSS5PJY Owners Manual - Page 4

About the controls with temperature settings., Consumer Support, Troubleshooting Tips - refrigerators

Get GE PGSS5PJY - Profile 24.9 cu. Ft. Bottom-Freezer Refrigerator PDF manuals and user guides View all GE PGSS5PJY manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Operating Instructions Safety Instructions About the controls with temperature settings. Installation Instructions (Models with controls inside the refrigerator) HOME HELP LOCK Hold for 3 Seconds to activate Lock ENERGY SAVER ON FREEZER 0F REFRIGERATOR 37 F PRECISE FILL OPTIONS TURBO COOL ENERGY SAVER DOOR ALARM (Models with controls on the door) NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now. The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings. The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment. Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator. Changing the Temperature For Controls-on-the-Door Models: Once the desired temperature has been set, the Models with External Dispensers: To change the Refrigerator temperature: Access By: Home > Refrigerator Activate By: Using the arrows to select the desired temperature. You must press ENTER to set the new temperature. To change the Freezer temperature: temperature display will return to the actual refrigerator and freezer temperatures after 5 seconds. Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set. To turn the cooling system off, tap the WARMER pad for either the refrigerator or the freezer until the display shows OFF. To turn the unit back on, press the COLDER pad for Access By: Home > Freezer either the refrigerator or freezer. Then press the COLDER Activate By: Using the arrows to select the desired temperature. You must press ENTER to set the new temperature. Once the desired temperature has been set, the display will return to the HOME screen and show the set temperatures pad again and it will go to the preset points of 0°F for the freezer and 37°F for the refrigerator. Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator. underneath the actual temperature display for several Models with External Dispensers: seconds. Several adjustments may be required. Each time you adjust the controls, allow 24 hours for the refrigerator to reach the temperature you have set. For Controls Inside the Refrigerator: Access By: Home > Options > Information and Settings > Cooling System Off To turn the cooling system back on, press the touch screen and press the ON button. Opening the door displays the actual temperature. To Activate By: Pressing ENTER. change the temperature, press either the WARMER or 4 COLDER touch pads until the desired temperature is displayed. Consumer Support Troubleshooting Tips

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
4
About the controls with temperature settings.
The temperature controls are preset in the factory at
37°F
for the refrigerator
compartment and
0°F
for the freezer compartment. Allow 24 hours for the temperature
to stabilize to the preset recommended settings.
The temperature controls can display both the
SET
temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly
from the
SET
temperature based on usage and operating environment.
Setting either or both controls to
OFF
stops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
For Controls-on-the-Door Models:
Models with External Dispensers:
To change the Refrigerator temperature:
Access By:
Home > Refrigerator
Activate By:
Using the arrows to select the desired
temperature. You must press
ENTER
to set the new
temperature.
To change the Freezer temperature:
Access By:
Home > Freezer
Activate By:
Using the arrows to select the desired
temperature. You must press
ENTER
to set the new
temperature.
Once the desired temperature has been set, the display will
return to the
HOME
screen and show the set temperatures
underneath the actual temperature display for several
seconds. Several adjustments may be required. Each time
you adjust the controls, allow 24 hours for the refrigerator
to reach the temperature you have set.
For Controls Inside the Refrigerator:
Opening the door displays the actual temperature. To
change the temperature, press either the
WARMER
or
COLDER
touch pads until the desired temperature is
displayed.
Once the desired temperature has been set, the
temperature display will return to the actual refrigerator
and freezer temperatures after 5 seconds. Several
adjustments may be required.
Each time you adjust controls, allow 24 hours for the
refrigerator to reach the temperature you have set.
To turn the cooling system off,
tap the
WARMER
pad for
either the refrigerator or the freezer until the display shows
OFF
.
To turn the unit back on,
press the
COLDER
pad for
either the refrigerator or freezer. Then press the
COLDER
pad again and it will go to the preset points of
0°F
for the
freezer and
37°F
for the refrigerator. Setting either or both
controls to
OFF
stops cooling in both the freezer and
refrigerator compartments, but does not shut off electrical
power to the refrigerator.
Models with External Dispensers:
Access By:
Home > Options > Information and Settings >
Cooling System Off
To turn the cooling system back on, press the touch screen
and press the
ON
button.
Activate By:
Pressing
ENTER.
Changing the Temperature
NOTE:
The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
Consumer Support
Troubleshooting Tips
Operating Instructions
Safety Instructions
Installation
Instructions
H
OME
H
ELP
L
OCK
Hold for 3 Seconds
to activate Lock
T
URBO
C
OOL
E
NERGY
S
AVER
D
OOR
A
LARM
F
REEZER
F
0
R
EFRIGERATOR
F
37
O
PTIONS
P
RECISE
F
ILL
E
NERGY
S
AVER
ON
(Models with controls inside the refrigerator)
(Models with controls on the door)