GE PSA1201RSS Installation Instructions - Page 6

Installation Instructions DAMAGE - SHIPMENT/ INSTALLATION • If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or replacement. • If the unit is damaged by the customer, repair or replacement is the responsibility of the customer. • If the unit is damaged by the installer (if other than the customer), repair or replacement must be made by arrangement between customer and installer. PARTS INCLUDED HARDWARE PACKET PART Wood Screws (1⁄4″ x 2″) Toggle Bolts (and wing nuts) (1⁄4″ x 3″) QUANTITY 2 4 Self-aligning Machine Screws (1⁄4″-28 x 31⁄4″) Self-aligning Machine Screw (1⁄4″-28 x 25⁄8″) Nylon Grommet (for metal cabinets) Exhaust Adaptor 3 2 (JVM1790 only) 1 (JVM1790 only) 2 1 PARTS INCLUDED ADDITIONAL PARTS PART Top Cabinet Template QUANTITY 1 1/4″ TO EDGE 12″ 4″ F. CUT OUT FOR HORIZONTAL OUTSIDE EXHAUST REAR WALL TEMPLATE Rear Wall 1 Template Installation 1 Instructions Separately 2 Packed Grease Filters Damper 1 Metal Screws (1⁄8″ x 1⁄2″) 1 black 2 bronze You will find the installation hardware contained in a packet with the unit. Check to make sure you have all these parts. NOTE: Some extra parts are included. 6