GE PSCS3RGXSS Use and Care Manual - Page 5

Safety Instructions Operating Instructions About the temperature controls. Not all features are on all models. Your controls will look like one of the following: ge.com Installation Instructions Non-LCD models LCD models NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now. > The temperature controls are preset in the factory at 37°F (3°C) for the refrigerator compartment and 0°F (-18°C) for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings. Refrigerator temperatures can be adjusted between 34°F and 46°F (1°C to 8°C), and the freezer temperatures can be adjusted between -6°F and +8°F (-21°C to -13°C). To change the Refrigerator temperature: LCD Models: Access By: Home > Refrigerator Activate By: Using the arrows to select the desired temperature. You must press ENTER to set the new temperature. To change the Freezer temperature: Access By: Home > Freezer Activate By: Using the arrows to select the desired temperature. You must press ENTER to set the new temperature. Once the desired temperature has been set, the display will return to the HOME screen and show the set temperatures underneath the actual temperature display for several seconds. Several adjustments may be required. Each time you adjust the controls, allow 24 hours for the refrigerator to reach the temperature you have set. Non-LCD Models: To change the temperature, press and release the FREEZER TEMP/FRIDGE TEMP pad. The SET light will come on and the display will show the set temperature. To change the temperature, tap either the or pad until the desired temperature is displayed. Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 5 seconds. Several adjustments may be required. Each time you adjust the controls, allow 24 hours for the refrigerator to reach the temperature you have set. The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment. > > Turning the cooling system off: LCD models: Turning the cooling system OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator. LCD Models: Access By: Home > Options > Information and Settings > Cooling System Off To turn the cooling system back on, press the touch screen and press the ON button. Activate By: Pressing ENTER. Non-LCD Models: Press and release the FREEZER TEMP/FRIDGE TEMP pad. Press to set freezer temperature to 5. The display will show OFF. To turn the unit back on, press the FREEZER TEMP/FRIDGE TEMP pad. Press to set the freezer and refrigerator temperatures to the preset points of 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator. When the unit is turned back on, it will take up to 24 hours to stabilize. > Performance Air Flow System The Performance Air-Flow System is designed to maximize temperature control in the refrigerator and freezer compartments. This unique special feature consists of the Air Tower along the back wall of the refrigerator and the Air Tunnel on the bottom portion of the freezer rear wall. Placing food in front of the louvers on these components will not affect performance. Although the Air Tower and the Air Tunnel can be removed, doing so will affect temperature performance. (For removal instructions, on-line, contact us at ge.com or call 800.GE.CARES. In Canada, contact us at geappliances.ca or call 1.800.561.3344.) 5 Troubleshooting Tips Consumer Support