GE PT925SNSS Use and Care Manual - Page 22

Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Special features of your oven control. Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them. The special feature modes can only be activated while the display is showing the time of day. They remain in the control's memory until the steps are repeated. To enter a special feature for either oven, you must first touch the upper oven BROIL HI/LO and BAKE pads at the same time. The lower oven BROIL HI/LO and BAKE pads will not activate special features. When the display shows your choice, touch the START pad. The special features will remain in memory after a power failure, except for the Sabbath feature, which will have to be reset. Help Function Touch this pad to get additional information on the keypad of your choice. Touch the HELP pad and the display will show "Press keypad for help on that feature or 1 for options." The options on pages 22 and 23 can be adjusted using the method described here or through HELP. 12-Hour Shutdown + With this feature, should you forget Touch the DELAY START pad until and leave the oven on, the control will no shdn (no shut-off) appears automatically turn off the oven after in the display. 12 hours during baking functions or after 3 hours during a broil function. Touch the START pad to activate the no shut-off and leave the control If you wish to turn OFF this feature, set in this special features mode. follow the steps below. Touch the upper oven BROIL HI/LO and BAKE pads at the same time until the display shows SF. Fahrenheit or Celsius Temperature Selection + Your oven control is set to use Touch the COOK TIME and BROIL the Fahrenheit temperature selections, HI/LO pads at the same time. + but you may change this to use the Celsius The display will show F (Fahrenheit). selections. Touch the COOK TIME and BROIL Touch the upper oven BROIL HI/LO HI/LO pads again at the same time. and BAKE pads at the same time The display will show C (Celsius). until the display shows SF. Touch the START pad. + 22 Tones at the End of a Timed Cycle At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continual 6-second beep may be canceled. To cancel the 6-second beep: Touch the upper oven BROIL HI/LO and BAKE pads at the same time until the display shows SF. Touch the BROIL pad. The display shows CONTI BEEP (continuous beep). Touch the BROIL pad again. The display shows SINGLE BEEP. (This cancels the one beep every 6 seconds.) Touch the START pad.