GE PT925SNSS Use and Care Manual - Page 29

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support Before you call for service... Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. GEAppliances.com Problem Oven light does not work Possible Causes Light bulb is loose. What To Do • Tighten or replace the bulb. Oven will not work A fuse in your home may be blown or the circuit breaker tripped. Oven controls improperly set. Oven too hot. • Replace the fuse or reset the circuit breaker. • See the Using the oven section. • Allow the oven to cool to below locking temperature. Food does not bake or roast properly Oven controls improperly set. Rack position is incorrect or the rack is not level. Incorrect cookware or cookware of improper size being used. Oven thermostat needs adjustment. • See the Using the oven section. • See the Using the oven section. • See the Using the oven section. • See the Adjust the oven thermostat-Do it yourself! section. Food does not broil properly Oven controls improperly set. Improper rack position being used. Cookware not suited for broiling. The probe is plugged into the outlet in the oven. In some areas the power (voltage) may be low. • Make sure you touch the BROIL HI/LO pad. • See the Broiling Guide. • For best results, use a pan designed for broiling. • Unplug and remove the probe from the oven. • Preheat the broil element for 10 minutes. • Broil for the longest period of time recommended in the Broiling Guide. Oven temperature too hot or too cold Oven thermostat needs adjustment. • See the Adjust the oven thermostat-Do it yourself! section. Clock and timer do not work A fuse in your home may be blown or the circuit breaker tripped. Oven controls improperly set. • Replace the fuse or reset the circuit breaker. • See the Using the clock and timer section. Oven will not self-clean The oven temperature is too high to set a self-clean operation. Oven controls improperly set. The probe is plugged into the outlet in the oven. • Allow the oven to cool and reset the controls. • See the Using the self-cleaning oven section. • Remove the probe from the oven. 29