GE WCVH6800JWW Use and Care Manual - Page 16
INsTallaTioN INsTrucTioNs - vibration
UPC - 084691177098
View all GE WCVH6800JWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installation Instructions LOCatIOn OF yOUr WaSHEr Do not Install the Washer: 1. In an area exposed to dripping water or outside weather conditions. The ambient temperature should never be below 60°F (15.6°C) for proper washer operation. 2. In an area where it will come in contact with curtains or drapes. 3. On carpet. The floor MUSt be a hard surface with a maximum slope of 1/2″ per foot (1.27 cm per 30 cm). To make sure the washer does not vibrate or move, you may have to reinforce the floor. nOtE: If floor is in poor condition, use 3/4″ impregnated plywood sheet solidly attached to the existing floor covering. IMPOrtant: Minimum Installation Clearances • When installed in alcove: Sides, Rear, Top = 0″ (0 cm) • When installed in closet: Sides, Rear, Top = 0″ (0 cm), Front = 1″ (2.54 cm) • Closet door ventilation openings required: 2 louvers each 60 square in. (387 cm2), located 3″ (7.6 cm) from top and bottom of door rOUgH-In DIMEnSIOnS FRONT 27.0" (68.6 cm) 20.4" (51.9 cm) ELECTRONIC TRANSPARENT VISOR 2.2" (5.6 cm) 40.6"* (103.1 cm) SIDE 30.6" (77.7 cm) 1.6" (3.9 cm) 40.6"* (103.1cm) 39.1" (99.2 cm) *NOTE: With pedestal, 52.6" Stacked, 84" 16