Gigabyte 7VM400AM-RZ User Manual - Page 17
SPDIF SPDIF Out Connector, SUR_CEN Surround Center Connector, F_AUDIO Front Audio Connector
View all Gigabyte 7VM400AM-RZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English 9) F_AUDIO (Front Audio Connector) If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis you are buying support front audio connector, please contact your dealer. Please note, you can have the alternative of using front audio connector or of using rear audio connector to play sound. Pin No. Definition 12 1 MIC 2 GND 3 REF 4 Power 9 10 5 Front Audio (R) 6 Rear Audio (R) 7 Reserved 8 No Pin 9 Front Audio (L) 10 Rear Audio (L) 10) SUR_CEN (Surround Center Connector) Please contact your nearest dealer for optional SUR_CEN cable. Pin No. Definition 12 1 SUR OUTL 2 SUR OUTR 56 3 GND 4 No Pin 5 CENTER_OUT 6 BASS_OUT 11) SPDIF (SPDIF Out Connector) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function. Be careful with the polarity of the SPDIF connector. Check the pin assignment carefully while you connect the SPDIF cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional SPDIF cable, please contact your local dealer. Pin No. Definition 12 1 VCC 2 No Pin 3 SPDIF 56 4 NC 5 GND 6 GND - 17 - Hardware Installation Process