Gigabyte GA-78LMT-S2PV Manual - Page 22

&& IDE Channel 0, 1 Master/Slave IDE Channel 0, 1 Master/Slave Options are: •• None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. •• Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) •• Manual Allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to CHS. Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large. Capacity Approximate capacity of the currently installed hard drive. && Halt On Allows you to determine whether the system will stop for an error during the POST. Options are: "All Errors," "No Errors," "All, But Keyboard". (Default) && Memory These fields are read-only and are determined by the BIOS POST. 2-4 Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2012 Award Software Advanced BIOS Features ` IGX Configuration Load Line Control AMD C1E Support AMD C6 Support (Note) Virtualization AMD K8 Cool&Quiet control AMD APM Master Mode (Note) CPU core Control (Note) x One Core Per Compute Unit (Note) x CPU core 1-2 (Note) x CPU core 3-4 (Note) ` Hard Disk Boot Priority EFI CD/DVD Boot Option First Boot Device Second Boot Device Third Boot Device Password Check HDD S.M.A.R.T. Capability Away Mode Full Screen LOGO Show Init Display First [Press Enter] [Auto] [Disabled] [Enabled] [Disabled] [Auto] [Auto] Disabled Enabled Enabled [Press Enter] [Auto] [Hard Disk] [CDROM] [USB-HDD] [Setup] [Disabled] [Disabled] [Enabled] [PCI Slot] Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults && IGX Configuration The settings in this submenu are synchronous to those under the same items on the MB Intelligent Tweaker(M.I.T.) main menu. && Load Line Control Enables or disables Load Line control. This item allows you to adjust Vdroop at different levels. Enabling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load. Auto lets the BIOS automatically configure this setting. (Default: Auto) && AMD C1E Support Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power consumption will be reduced during system halt state. Enabled If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the hardware C1E function. If not, the BIOS will enable the software C1E function. Disabled Disables this function. (Default) (Note) This item is present only when you install a CPU that supports this feature. - 22 -