Gigabyte GA-7PESLX Manual - Page 20
Hardware Installation
View all Gigabyte GA-7PESLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Speed LED Link Activity LED 10/100 LAN Port MLAN Speed LED: Link/Activity LED: State Green On Green Blink Off Description 100 Mbps data rate 10 Mbps or 100 Mbps data rate 10 Mbps data rate State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring Speed LED Link Activity LED 10/100/1000 LAN Port 1Gbps Speed LED: Link/Activity LED: State Yellow On Yellow Blink Description 1 Gbps data rate Identify 1 Gbps data rate State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Green On Green Blink 100 Mbps data rate Off Identify 100 Mbps data No data transmission or receiving is occurring rate Off 10 Mbps data rate • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. - 20 - Hardware Installation