Gigabyte GA-7PESLX Manual - Page 63
SATA Configuration
View all Gigabyte GA-7PESLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
2-2-6 SATA Configuration SATA Port 0/1/2/3/4/5 (Note) Displays the installed HDD devices information. SATA Mode Select the on chip SATA type. IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the IDE emulation mode. This is not allowed to access RAID setup utility. RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will be allows access the RAID setup utility at boot time. AHCI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID function is disabled and cannot be access the RAID setup utility at boot time. Options available: IDE/RAID/AHCI/Disabled. Default setting is IDE Mode. Serial ATA Controller 0/1 Determine the onboard SATA controller mode. Compatible: SATA and PATA drives are auto-detected and placed in Legacy mode. Enhanced: SATA and PATA drives are auto-detected and placed inNative mode. Options available: Disabled/Enhanced/Compatible. Default setting for Serial ATA 0 is Compatible. Default setting for Serial ATA 1 is Enhanced. (Note) This item is will not appear when the SATA mode is set ot RAID mode. BIOS Setup - 63 -