Gigabyte GA-890FXA-UD7 Manual - Page 10

1-2 Product Specifications CPU Support for AM3 processors: AMD Phenom™ II processor/ AMD Athlon™ II processor (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus 5200 MT/s Chipset  North Bridge: AMD 890FX  South Bridge: AMD SB850 Memory  4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)  Dual channel memory architecture  Support for DDR3 1866 (O.C.)/1333/1066 MHz memory modules (Note 2) (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Audio  Realtek ALC889 codec  High Definition Audio  2/4/5.1/7.1-channel  Support for Dolby® Home Theater  Support for S/PDIF In/Out  Support for CD In LAN  2 x Realtek RTL8111D chips (10/100/1000 Mbit)  Support for Teaming  Support for Smart Dual LAN Expansion Slots  2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) (Note 3) 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2) (Note 3) 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) (Note 4) (All PCI Express slots conform to PCI Express 2.0 standard.)  1 x PCI slot Multi-Graphics  Support for 2-Way/3-Way/4-Way ATI CrossFireX™ technology Technology Storage Interface  South Bridge: - 6 x SATA 6Gb/s connectors (SATA3_0~SATA3_5) supporting up to 6 SATA 6Gb/s devices - Support for SATA RAID 0, RAID 1, RAID 5, RAID 10, and JBOD  GIGABYTE SATA2 chip: - 2 x SATA 3Gb/s connectors (GSATA2_6, GSATA2_7) supporting up to 2 SATA 3Gb/s devices - Support for SATA RAID 0, RAID 1, and JBOD - 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices  JMicron JMB362 chip: - 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel sup porting up to 2 SATA 3Gb/s devices - Support for SATA RAID 0, RAID 1, and JBOD  iTE IT8720 chip: - 1 x floppy disk drive connector supporting up to 1 floppy disk drive Hardware Installation - 10 -