Gigabyte GA-890FXA-UD7 Manual - Page 52

Onboard PCIE Devices CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Onboard PCIE Devices Primary Dual Slot Config Secondary Dual Slot Config PCIEX4_2 Slot Config [Auto] [Auto] [As X1 Link] Item Help Menu Level  Onboard GSATA controller Onboard GSATA Mode Onboard ESATA controller Onboard ESATA Mode [Enabled] [IDE] [Enabled] [IDE] Onboard LAN1 Function Onboard LAN1 Boot ROM } SMART LAN1 Onboard LAN2 Function Onboard LAN2 Boot ROM } SMART LAN2 [Enabled] [Disabled] [Press Enter] [Enabled] [Disabled] [Press Enter] Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Primary Dual Slot Config (PCIEX16_1 and PCIEX8_1 slots) Specifies the operating bandwidth for the PCIEX16_1 and PCIEX8_1 slots. Auto Lets the BIOS automatically configure this setting depending on the device being installed. (Default) X16 PCIEX16_1 operates at x16 and PCIEX8_1 becomes unavailable. X8/X8 PCIEX16_1 and PCIEX8_1 operate at x8 respectively. Secondary Dual Slot Config (PCIEX16_2 and PCIEX8_2 slots) Specifies the operating bandwidth for the PCIEX16_2 and PCIEX8_2 slots. Auto Lets the BIOS automatically configure this setting depending on the device being installed. (Default) X16 PCIEX16_2 operates at x16 and PCIEX8_2 becomes unavailable. X8/X8 PCIEX16_2 and PCIEX8_2 operate at x8 respectively. PCIEX4_2 Slot Config Specifies the operating bandwidth for the PCIEX4_2 slot. As X1 Link PCIEX4_2 operates at x1 mode. (Default) As X4 Link PCIEX4_2 operates at x4 mode. Please note that due to bandwidth sharing, the onboard IDE, GSATA2_6, and GSATA2_7 connectors will become unavailable. Onboard GSATA controller (GIGABYTE SATA2 Chip, IDE and GSATA2_6/7 Connectors) Enables or disables the IDE and SATA controllers integrated in the GIGABYTE SATA2 chip. (Default: Enabled) Onboard GSATA Mode (GIGABYTE SATA2 Chip, GSATA2_6/7 Connectors) Enables or disables RAID for the SATA controller integrated in the GIGABYTE SATA2 chip or configures the SATA controller to AHCI mode. IDE Configures the SATA controller to IDE mode. (Default) AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. RAID/IDE Enables RAID for the SATA controller; the IDE controller still operates in IDE mode. BIOS Setup - 52 -