Gigabyte GA-890FXA-UD7 Manual - Page 45
CKE Power Down Mode
UPC - 818313010322
View all Gigabyte GA-890FXA-UD7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
**DCTs Drive Strength** ProcOdt(ohms) Options are: Auto (default), 240 ohms, 120 ohms, 60 ohms. DQS Drive Strength Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x. Data Drive Strength Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x. MEMCLK Drive Strength Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x. Addr/Cmd Drive Strength Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x. CS/ODT Drive Strength Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x. CKE Drive Strength Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x. **DCTs Addr/Cmd Timing** Addr/Cmd setup time Options are: Auto (default), 1/2T, 1T. Addr/Cmd fine delay Options are: Auto (default), 0/64~31/64. CS/ODT setup time Options are: Auto (default), 1/2T, 1T. CS/ODT fine delay Options are: Auto (default), 0/64~31/64. CKE setup time Options are: Auto (default), 1/2T, 1T. CKE fine delay Options are: Auto (default), 0/64~31/64. Bank Interleaving Enables or disables memory bank interleaving. Enabled allows the system to simultaneously access different banks of the memory to increase memory performance and stability. (Default: Enabled) Channel Interleave Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. (Default: Enabled) DQS Training Control Enables or disables memory DQS training each time the system restarts. (Default: Skip DQS) CKE Power Down Mode Determines whether to set the memory to power down mode when the CKE pin is closed. (Default: Disabled) Memclock tri-stating Determines whether to enable memory clock tri-stating in CPU C3 or Alt VID mode. (Default: Disabled) - 45 - BIOS Setup