Gigabyte GA-8I955X Royal Manual - Page 13

Step 3: If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 19 below will appear. Use the ARROW keys to select Silicon Image SiI 3132 SoftRAID 5 Controller for Windows XP/Server 2003(Note) (or the other if you wish to install Windows 2000) and press ENTER. Then it will begin to load the SATA driver from the floppy disk. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Silicon Image SiI 3132 SoftRAID 5 Controller for Windows XP/Server 2003 Silicon Image SiI 3132 SoftRAID 5 Controller for Windows 2000 ENTER=Select F3=Exit Figure 19 Step 4: When the screen as shown below appears, press ENTER to continue the SATA driver installation from the floppy disk. Windows Setup Setup will load support for the following mass storage device(s): Silicon Image SiI 3132 SoftRAID 5 Controller for Windows XP/Server 2003 * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device Enter=Continue F3=Exit Figure 20 If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct SATA driver again from the motherboard driver CD. (Note): For non-RAID driver, the items are Silicon Image SiI 3132 SATALink Controller for Windows XP/Server 2003 and Silicon Image SiI 3132 SATALink Controller for Windows 2000. - 13 - SATA Hard Drive Configurations (Sil3132)