Gigabyte GA-990FX-Gaming Manual - Page 16

AHCI/RAID mode, M2F_20G M.2 Socket 3 Connector

Get Gigabyte GA-990FX-Gaming PDF manuals and user guides View all Gigabyte GA-990FX-Gaming manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

B S_ B 7) M2F_20G (M.2 Socket 3 Connector) The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs. It can support SATA RAID configuration through the AMD SB950 controller. Please note that an M.2 PCIe SSD cannot be used to create a RAID set with SATA drive(s). Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. S S 80F 60F 42F Follow the steps below to correctly install an M.2 SSD in the M.2 connector. Step 1: Use a screw driver to unfasten the screw and nut from the motherboard. Locate the proper mounting hole for the M.2 SSD to be installed and then screw the nut first. Step 2: F Slide the M.2 SSD into the connector at an angle. Step 3: Press the M.2 SSD down and then secure it with the screw. On the motherboard there are three length adjustment holes for the M.2 SSD. Select the proper hole for the M_.02 SSD to be installed and refasten the screw and nut. When installing different types of M.2 SSDs (including SATA SSDs, PCIe x4 SSDs, and PCIe x2 SSDs), be sure to refer to the supported configurations in the tables below according to the operating mode of your SATA controller (AHCI mode or RAID mode). _F •• AHCI/RAID mode: Connector Type of SSD SATA3_0 SATA3_1 SATA3_2 SATA3_3 SATA3_4 SATA3_5 M.2 SATA SSD a a a a a r M.2 PCIe x4 SSD (Note) a a _0 F a a a a M.2 PCIe x2 SSD (Note) a a a a a a No M.2 SSDs Installed a a a a a a a: Supported, r: Not supported. (Note) Please note that an M.2 PCIe SSD cannot be used to create a RAID set with SATA drive(s). - 16 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
±
When installing different types of M.2 SSDs (including SATA SSDs, PCIe x4 SSDs, and PCIe x2 SSDs), be
sure to refer to the supported configurations in the tables below according to the operating mode of your
SATA controller (AHCI mode or RAID mode).
•
AHCI/RAID mode:
SATA3_0
SATA3_1
SATA3_2
SATA3_3
SATA3_4
SATA3_5
M.2 SATA SSD
a
a
a
a
a
r
M.2 PCIe x4
SSD
(Note)
a
a
a
a
a
a
M.2 PCIe x2
SSD
(Note)
a
a
a
a
a
a
No M.2 SSDs
Installed
a
a
a
a
a
a
a
: Supported,
r
: Not supported.
Connector
Type of SSD
On the motherboard there are three length adjustment holes for the M.2 SSD. Select the proper
hole for the M.2 SSD to be installed and refasten the screw and nut.
7)
M2F_20G (M.2 Socket 3 Connector)
The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs. It can support SATA RAID configuration
through the AMD SB950 controller. Please note that an M.2 PCIe SSD cannot be used to create a RAID
set with SATAdrive(s). Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID
array.
80F
60F
42F
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Use a screw driver to unfasten the screw and nut from the motherboard. Locate the proper mounting hole
for the M.2 SSD to be installed and then screw the nut first.
Step 2:
Slide the M.2 SSD into the connector at an angle.
Step 3:
Press the M.2 SSD down and then secure it with the screw.
(Note)
Please note that an M.2 PCIe SSD cannot be used to create a RAID set with SATA drive(s).
- 16 -