Gigabyte GA-990FX-Gaming Manual - Page 28

Peripherals, Initial Display Output, Audio LED, OnChip SATA Controller, OnChip SATA Type

Get Gigabyte GA-990FX-Gaming PDF manuals and user guides View all Gigabyte GA-990FX-Gaming manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

To cancel the password, press on the password item and when requested for the password, enter the correct one first. When prompted for a new password, press without entering any password. Press again when prompted to confirm. NOTE: Before setting the User Password, be sure to set the Administrator Password first. 2-5 Peripherals && Initial Display Output Specifies the first initiation of the monitor display from the installed PCI Express graphics card. PCIe 1 Slot Sets the PCI Express graphics card on the PCIEX16_1 slot as the first display. (Default) PCIe 2 Slot Sets the PCI Express graphics card on the PCIEX16_2 slot as the first display. PCIe 3 Slot Sets the PCI Express graphics card on the PCIEX4 slot as the first display. && Audio LED Enables or disables the onboard audio LED function. Off Disables this function. Still Mode The LEDs stay constantly on. (Default) Beat Mode The brightness of the LED changes according to the music rhythm. Pulse Mode The brightness of the LED changes slowly and smoothly like breath. && OnChip SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && OnChip SATA Type Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Native IDE RAID AHCI Configures the SATA controller to IDE mode. Enables RAID for the SATA controller. Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) - 28 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
To cancel the password, press <Enter> on the password item and when requested for the password, enter
the correct one first. When prompted for a new password, press <Enter> without entering any password.
Press <Enter> again when prompted to confirm.
NOTE: Before setting the User Password, be sure to set the Administrator Password first.
2-5
Peripherals
&
Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card.
±
PCIe 1 Slot
Sets the PCI Express graphics card on the PCIEX16_1 slot as the first display. (Default)
±
PCIe 2 Slot
Sets the PCI Express graphics card on the PCIEX16_2 slot as the first display.
±
PCIe 3 Slot
Sets the PCI Express graphics card on the PCIEX4 slot as the first display.
&
Audio LED
Enables or disables the onboard audio LED function.
±
Off
Disables this function.
±
Still Mode
The LEDs stay constantly on. (Default)
±
Beat Mode
The brightness of the LED changes according to the music rhythm.
±
Pulse Mode
The brightness of the LED changes slowly and smoothly like breath.
&
OnChip SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
&
OnChip SATA Type
Enables or disables RAID for the SATAcontrollers integrated in the Chipset or configures the SATAcontrollers
to AHCI mode.
±
Native IDE
Configures the SATA controller to IDE mode.
±
RAID
Enables RAID for the SATA controller.
±
AHCI
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
- 28 -