Gigabyte GA-990FXA-UD5 R5 Manual - Page 10

Product Specifications, Support for RAID 0, RAID 1, and JBOD - amd

Page 10 highlights

1-2 Product Specifications CPU ŠŠ AM3+ Socket: - AMD AM3+ FX processors - AMD AM3 Phenom™ II processors/ AMD Athlon™ II processors (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus ŠŠ 5200 MT/s Chipset ŠŠ North Bridge: AMD 990FX ŠŠ South Bridge: AMD SB950 Memory ŠŠ 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. ŠŠ Dual channel memory architecture ŠŠ Support for DDR3 2000 (O.C.)/1866/1600/1333/1066 MHz memory modules * To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU first. ŠŠ Support for Extreme Memory Profile (XMP) memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Audio ŠŠ Realtek® ALC1150 codec ŠŠ High Definition Audio ŠŠ 2/4/5.1/7.1-channel ŠŠ Support for Dolby® Home Theater ŠŠ Support for S/PDIF Out LAN ŠŠ Realtek® GbE LAN chip (10/100/1000 Mbit) Expansion Slots ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Multi-Graphics Technology ŠŠ Storage Interface ŠŠ ŠŠ 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots. 1 x PCI Express x16 slot, running at x8 (PCIEX8) * The PCIEX8 slot shares bandwidth with the PCIEX16_2 slot. When PCIEX8 is populated with a PCI Express expansion card, the PCIEX16_2 slot will operate at up to x8 mode. 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) 1 x PCI Express x1 slot (All PCI Express slots conform to PCI Express 2.0 standard.) 1 x PCI slot Support for 2-Way/3-Way AMD CrossFire™/NVIDIA® SLI™ technology South Bridge: - 6 x SATA 6Gb/s connectors (SATA3 0~SATA3 5) - Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD 2 x Marvell® 88SE9172 chips: - 2 x SATA 6Gb/s connectors (GSATA3 6/7) - 2 x eSATA 6Gb/s connectors on the back panel - Support for RAID 0 and RAID 1 Hardware Installation - 10 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

Hardware Installation
- 10 -
1-2
Product Specifications
CPU
³
AM3+ Socket:
-
AMD AM3+ FX processors
-
AMD AM3 Phenom
II processors/ AMD Athlon
II processors
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport
Bus
³
5200 MT/s
Chipset
³
North Bridge: AMD 990FX
³
South Bridge: AMD SB950
Memory
³
4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
*
Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than the size of
the physical memory installed.
³
Dual channel memory architecture
³
Support for DDR3 2000 (O.C.)/1866/1600/1333/1066 MHz memory modules
*
To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU
first.
³
Support for Extreme Memory Profile (XMP) memory modules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Audio
³
Realtek
®
ALC1150 codec
³
High Definition Audio
³
2/4/5.1/7.1-channel
³
Support for Dolby
®
Home Theater
³
Support for S/PDIF Out
LAN
³
Realtek
®
GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
³
2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be
sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics
cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2
slots.
³
1 x PCI Express x16 slot, running at x8 (PCIEX8)
* The PCIEX8 slot shares bandwidth with the PCIEX16_2 slot. When PCIEX8 is
populated with a PCI Express expansion card, the PCIEX16_2 slot will operate at
up to x8 mode.
³
2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2)
³
1 x PCI Express x1 slot
(All PCI Express slots conform to PCI Express 2.0 standard.)
³
1 x PCI slot
Multi-Graphics
Technology
³
Support for 2-Way/3-Way AMD CrossFire
/NVIDIA
®
SLI
technology
Storage Interface
³
South Bridge:
-
6 x SATA 6Gb/s connectors (SATA3 0~SATA3 5)
-
Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
³
2 x Marvell
®
88SE9172 chips:
-
2 x SATA 6Gb/s connectors (GSATA3 6/7)
-
2 x eSATA 6Gb/s connectors on the back panel
-
Support for RAID 0 and RAID 1