Gigabyte GA-990FXA-UD5 R5 Manual - Page 49
Peripherals, Initial Display Output, OnChip SATA Controller
View all Gigabyte GA-990FXA-UD5 R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
2-6 Peripherals && Initial Display Output Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express graphics card. PCIe 1 Slot Sets the PCI Express graphics card on the PCIEX16_1 slot as the first display. (Default) PCIe 2 Slot Sets the PCI Express graphics card on the PCIEX4_1 slot as the first display. PCIe 3 Slot Sets the PCI Express graphics card on the PCIEX16_2 slot as the first display. PCIe 4 Slot Sets the PCI Express graphics card on the PCIEX4_2 slot as the first display. PCIe 5 Slot Sets the PCI Express graphics card on the PCIEX8 slot as the first display. PCI Sets the PCI graphics card on the PCI slot as the first display. && OnChip SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && OnChip SATA Type (SATA3 0~SATA3 3 connectors) Enables or disables RAID for the SATA controllers integrated in the AMD Chipset or configures the SATA controllers to RAID mode. Native IDE Configures the SATA controller to IDE mode. RAID Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && OnChip SATA Port4/5 Type (SATA3 4~SATA3 5 connectors) This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating mode of the integrated SATA3 4~SATA3 5 connectors. As SATA Type The mode depends on the OnChip SATA Type settings. IDE Disables RAID for the SATA controller and configures the SATA controller to IDE mode. (Default) - 49 - BIOS Setup