Gigabyte GA-G41M-Combo Manual - Page 7

1-2 Product Specifications CPU w w Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® processor/Intel® Celeron® processor in the LGA775 package (Go to GIGABYTE's website for the latest CPU support list.) L2 cache varies with CPU Front Side Bus w 1333/1066/800 MHz FSB Chipset w w Memory  Onboard Graphics  Audio      LAN  North Bridge: Intel® G41 Express Chipset South Bridge: Intel® ICH7 DDR3: - 2 x 1.5V DDR3 DIMM sockets supporting up to 4 GB of system memory - Dual channel memory architecture - Support for DDR3 1333(O.C.)/1066/800 MHz memory modules DDR2: - 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory (Note 1) - Dual channel memory architecture - Support for DDR2 1066(O.C.)/800/667 MHz memory modules (Note: Mixed mode, populating DDR2 and DDR3 memory modules simultaneously is not supported. Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) North Bridge: - 1 x D-Sub port VIA VT1708S codec High Definition Audio 2/4/5.1-channel Support for S/PDIF Out Support for CD In 1 x Atheros AR8151 chip (10/100/1000 Mbit) Expansion Slots   w 1 x PCI Express x16 slot, running at x16 1 x PCI Express x1 slot 2 x PCI slots Storage Interface  South Bridge: - 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices - 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices w iTE IT8718F chip: - 1 x floppy disk drive connector supporting up to 1 floppy disk drive USB  South Bridge: - Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers) Internal w 1 x 24-pin ATX main power connector Connectors w 1 x 4-pin ATX 12V power connector w 1 x floppy disk drive connector w 1 x IDE connector w 4 x SATA 3Gb/s connectors - 7 - Hardware Installation