Gigabyte GA-M51GM-S2G Manual - Page 36
Password Check, HDD S.M.A.R.T. Capability, Init Display First, Frame Buffer Size, Onboard GPU
UPC - 818313002914
View all Gigabyte GA-M51GM-S2G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
English Password Check System The system can not boot and can not access to Setup page will be Setup denied if the correct password is not entered at the prompt. The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt. (Default value) HDD S.M.A.R.T. Capability This feature allows your hard disk to report read/write errors and to issue warnings when thirdparty hardware monitor utility is installed. Enabled Enabled HDD S.M.A.R.T. capability. Disabled Disabled HDD S.M.A.R.T. capability.(Default value) Init Display First This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard. PCI Slot Onboard VGA Set Init Display First to PCI VGA card. Set Init Display First to onboard VGA. PEG Set Init Display First to PCI Express VGA card.(Default value) Frame Buffer Size 16MB 32MB Set On-chip frame buffer size to 16MB. Set On-chip frame buffer size to 32MB. 64MB Set On-chip frame buffer size to 64MB.(Default value) 128MB Set On-chip frame buffer size to 128MB. Disabled Disable this function. Onboard GPU Enable If No Ext PEG Output from the onboard GPU when no PCI Express VGA card is Always Enable installed. (Default value) Always output from the onboard GPU. GA-M51GM-S2G Motherboard - 36 -