Gigabyte GA-M57SLI-S4 Manual - Page 18
Connecting Two Graphics Cards
UPC - 818313003058
View all Gigabyte GA-M57SLI-S4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English Connecting Two Graphics Cards: Step 1: Observe the steps in "1-5 Installing an Expansion Card" and install two SLI-ready graphics cards of the same model on the PCIE_16_1 and PCIE_16_2 slots. Step 2: Insert the SLI bridge (the GC-DGBR2-RH) in the SLI gold edge connectors on top of both cards. Make sure the two mini female slots on the bridge connector securely fit onto the SLI gold edge connetors of both cards. Female slots on the bridge connector Gold edge connector on the top of graphics card Step 3: In order to securely fix the bridge connector beween the two cards, you must install the retention bracket included with the motherboard and secure the retention bracket to the chassis back panel with a screw. place this part on the top of the bridge connector. retention bracket Step 4: Plug the display cable into the graphics card on the PCIE_16_1 slot(Note). (Note) To enable the SLI function, you must plug the display cable into the graphics card on the PCIE_16_1 slot. GA-M57SLI-S4 Motherboard - 18 -