Gigabyte GA-M720-US3 Manual - Page 36

Robust Graphics Booster Enables or disables the control of VGA Core clock. VGA Core Clock Allows you to alter the core clock for the graphics chip and is configurable only if the Robust Graphics Booster option is set to Enabled. The core clock can be increased by 1% ~ 50%. DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2008 Award Software DRAM Configuration SLI-Ready Memory Set Memory Clock x Memory Clock DDRII Timing Items x CAS# latency x RAS to CAS R/W Delay x Row Precharge Time x Minimum RAS Active Time x 1T/2T Command Timing x TwTr Command Delay x Trfc0 for DIMM1 x Trfc2 for DIMM2 x Trfc1 for DIMM3 x Trfc3 for DIMM4 x Write Recovery Time x Precharge Time x Row Cycle Time x RAS to RAS Delay [Disabled] [Auto] DDR 800 [Auto] SPD Auto 5T Auto 5T Auto 5T Auto 15T Auto - - Auto 3T Auto 105ns Auto - - Auto - - Auto - - Auto 6T Auto 3T Auto 21T Auto 3T Auto 5T 5T 5T 15T - 3T 105ns - - - 6T 3T 21T 3T Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults SLI-Ready Memory Allows you to enable or disable the SLI-Ready (EPP) memory function. (Default: Disabled) Set Memory Clock Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory clock as required. Manual allows all clock control items below to be configurable. (Default: Auto) Memory Clock This option is configurable only when Set Memory Clock is set to Manual. When you use a AM2 CPU: DDR 400 Sets Memory Clock to DDR 400. DDR 533 Sets Memory Clock to DDR 533. DDR 667 Sets Memory Clock to DDR 667. DDR 800 Sets Memory Clock to DDR 800. When you use a AM2+ CPU: X2.00 Sets Memory Clock to X2.00. X2.66 Sets Memory Clock to X2.66. X3.33 Sets Memory Clock to X3.33. X4.00 Sets Memory Clock to X4.00. X5.33 Sets Memory Clock to X5.33. GA-M720-US3 Motherboard - 36 -