Gigabyte GA-Q57M-S2H Manual - Page 48
Delay For HDD Secs, Limit CPUID Max. to 3
View all Gigabyte GA-Q57M-S2H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Limit CPUID Max. to 3 (Note) Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP operating system; set this item to Enabled for legacy operating system such as Windows NT4.0. (Default: Disabled) No-Execute Memory Protect (Note) Enables or disables Intel Execute Disable Bit function. This function may enhance protection for the computer, reducing exposure to viruses and malicious buffer overflow attacks when working with its sup- porting software and system. (Default: Enabled) Console Redirection This feature allows your computer to send contents displayed in POST or MS-DOS to another computer. (Default: Disabled) Baud Rate Displays the speed at which the contents are sent. Agent after boot This feature allows your computer to send contents to another computer after the operating system has booted. (Default: Enabled) Delay For HDD (Secs) Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. The ad- justable range is from 0 to 15 seconds. (Default: 0) ASF support This feature allows another computer to control power-on/off or carry out remote control of your computer. (Default: Enabled) Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card or the onboard VGA. PCI Sets the PCI graphics card as the first display. (Default) Onboard PEG PEG2 Sets the onboard VGA as the first display. Sets the PCI Express graphics card on the PCIEX16 slot as the first display. Sets the PCI Express graphics card on the PCIEX4 slot as the first display. Onboard VGA Enables or disables the onboard VGA function. Enable If No Ext PEG Activates the onboard VGA only if no PCI Express VGA card is installed. (Default) Always Enable Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to set up a dual view configuration, set this item to Always Enable. (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. BIOS Setup - 48 -