Gigabyte GA-X170-EXTREME ECC User Manual - Page 74
Delete RAID Volume, MAIN MENU, DELETE, VOLUME MENU, Mark Disk as Spare
View all Gigabyte GA-X170-EXTREME ECC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Delete RAID Volume To delete a RAID array, select Delete RAID Volume in MAIN MENU and press . In the DELETE VOLUME MENU section, use the up or down arrow key to select the array to be deleted and press . When prompted to confirm your selection (Figure 15), press to confirm or to abort. Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 4.3.0.1018 Copyright (C) 2003-14 Intel Corporation. All Rights Reserved. Name Volume0 Level RAID0(Stripe) [ DELETE VOLUME MENU ] Drives 2 Capacity 884.9GB Status Normal Bootable Yes [ DELETE VOLUME VERIFICATION ] ALL DATA IN THE VOLUME WILL BE LOST! Are you sure you wa[nHt tEoLdPel]ete "Volume0"? (Y/N) : Deleting a volume will reset the disks to non-RAID. WARNING: ALL DISK DATA WILL BE DELETED. [hi]-Select [ESC]-Previous Menu Figure 15 [DEL]-Delete Volume Mark Disk as Spare If a hard drive in the RAID array is corrupted, the Spare drive will automatically replace the damaged one and the array will be rebuilt. This function is available only in fault-tolerant configurations, such as RAID 1, RAID 5, and RAID 10. Important guidelines: • The Spare drive must have equal or greater capacity than the old one. • The Spare drive is invisible and cannot be used to store data. Configuring a RAID Set - 74 -