Gigabyte GSmart G1345 User Manual- GSmart G1345 English Version - Page 32

To configure Wi-Fi settings 1. Tap Application Drawer > Settings > Wireless & networks. 2. Tap Wi-Fi Settings. 3. Tap Menu > Advanced. NOTE: If you want to use static IP, enter the IP settings as required. 4. In IP settings, Enter the information for IP address, Gateway, Netmask, and DNS. Tap OK to save your settings. Tethering & portable hotspot Share your phone's mobile data connection via USB or as a portable Wi-Fi hotspot. 1. Tap Application Drawer > Settings > Wireless & networks. 2. Tap Tethering & portable hotspot. 3. You can turn on/off USB tethering, turn on/off Portable Wi-Fi hotspot, or adjust the portable Wi-Fi hotspot settings. VPN settings Set up & manage Virtual Private Networks (VPNs.) 1. Tap Application Drawer > Settings > Wireless & networks. 2. Tap VPN settings > Add VPN to add VPNs. Manual settings for Cellular Data Network Check the availability of these connections with your network service provider and obtain the following information:  Access Point Name (APN)  Proxy  Port  User name  Password To set up a wireless data connection manually 1. Tap Application Drawer > Settings > Wireless & networks. 2. Tap Mobile networks > Dual SIM network settings > You can select SIM1 or SIM2(If SIM2 inserted) > Access Point Names. 3. Tap Menu > New APN. 4. Enter a name for the connection, APN, Proxy, Port, Username, and Password (if available) etc., and then, tap OK. 5. Finally, tap Menu > Save to save the whole settings. To start a data connection manually If you set up multiple data connections, select the connection you want to use manually. 1. Tap Application Drawer > Settings > Wireless & networks > Mobile networks > Dual SIM network settings > You can select SIM1 or SIM2(If SIM2 inserted) > Access Point Names. G1345│ 4-2