Gigabyte M1022C Manual - Page 36
Security Menu, 5 Boot menu - errors
View all Gigabyte M1022C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4.4 Security Menu 4.5 Boot menu Booktop M1022 SERIES USER'S MANUAL English 27 Set Supervisor Password A supervisor password must be set before a lower-level user password can be set. After selecting Change Supervisor Password, press Enter. You will be prompted for the new password, and then again to verify it. Type in 6 or fewer keystrokes. If you make an error, press Esc to start over. Set User Password With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter the Setup Utility and change or remove the Supervisor password, nor enable diskette access if it has been disabled. Quiet Boot [ Enabled ] / [ Disabled ] Booting in Text Mode. Boot Type Order To select the boot device, you can use the up or down arrow key, then press to move up the device in the list or press to move down the device in the list. To exit from this menu, press .