Gigabyte MD50-LS0 Manual - Page 34
SATA_DOM1 SATA port 1 DOM Jumper
View all Gigabyte MD50-LS0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3) SATA_DOM1 (SATA port 1 DOM Jumper) CAUTION! • If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2. • If the SATA DOM power is supplied by external power, set the jumper to pin 2-3. • If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage. Please refer to the pin definition table in the following. Pin No. Definition 1 1 P5V 2 SATA1 Pin7 3 GND 4) BIOS_PWD (Clearing Supervisor Password Jumper) 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: Skip supervisor password. Hardware Installation - 34 -
Hardware Installation
- 34 -
3)
SATA_DOM1 (SATA port 1 DOM Jumper)
CAUTION!
•
If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2.
•
If the SATA DOM power is supplied by external power, set the jumper to pin 2-3.
•
If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed
and set to
2-3 pins
(Default setting), in order to reduce any risk of hard disk damage.
Please refer to the pin definition table in the following.
Pin No.
Definition
1
P5V
2
SATA1 Pin7
3
GND
1
4)
BIOS_PWD (Clearing Supervisor Password Jumper)
2-3 Close: Skip supervisor password.
1-2 Close: Normal operation. (Default setting)
1
1