Gigabyte MD70-HB1 Manual - Page 20
When removing the cable, pull it straight out from the connector. Do not rock it side to side
View all Gigabyte MD70-HB1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Speed LED Link Activity LED 10/100/1000 LAN Port Speed LED: State Yellow On Yellow Blink Green On Green Blink Off Link/Activity LED: Description 1 Gbps data rate Identify 1 Gbps data rate 100 Mbps data rate Identify 100 Mbps data State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring rate 10 Mbps data rate Speed LED Link Activity LED 1000/10G LAN Port Speed LED: State Green On Green Blink Yellow On Yellow Blink Off Description 10 Gbps data rate Identify 10 Gbps data rate 1 Gbps data rate Identify 1 Gbps data rate 100 Mbps data rate Link/Activity LED: State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. Hardware Installation - 20 -