Gigabyte MH70-HD0 Manual - Page 25
SATA0/SATA1/SATA2/SATA3/SATA4/SATA5 SATA 6Gb/s Connectors, PMBUS PMBus connector
View all Gigabyte MH70-HD0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3) SATA0/SATA1/SATA2/SATA3/SATA4/SATA5 (SATA 6Gb/s Connectors The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and 1.5Gb/s standard. Each SATA connector supports a single SATA device. 7 1 SATA4 SATA2 SATA0 SATA5 SATA3 SATA1 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND • A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives are configured, the total number of hard drives must be an even number. • A RAID 10 configuration requires four hard drives. (Note) When a RAID configuration is built across the SATA 6Gb/s channels, the system performance of the RAID configuration may vary depends on the devices are connected. 4) PMBUS (PMBus connector) 1 5 Pin No. 1 2 3 4 5 Definition PMBus CLK PMBus DATA PMBus Alert GND 3.3V Sense - 25 - Hardware Installation