Gigabyte X470 AORUS ULTRA GAMING User Manual - Page 7

x S/PDIF Out header, I/O Controller Chip

Page 7 highlights

USB Internal Connectors Back Panel Connectors I/O Controller Hardware Monitor ŠŠ CPU: - 4 x USB 3.1 Gen 1 ports on the back panel ŠŠ Chipset: - 1 x USB Type-C™ port with USB 3.1 Gen 2 support, available through the internal USB header - 4 x USB 3.1 Gen 1 ports available through the internal USB headers - 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) ŠŠ 1 x 24-pin ATX main power connector ŠŠ 1 x 8-pin ATX 12V power connector ŠŠ 1 x CPU fan header ŠŠ 1 x water cooling CPU fan header ŠŠ 4 x system fan headers ŠŠ 2 x system fan/water cooling pump headers ŠŠ 2 x digital LED strip headers ŠŠ 2 x digital LED strip power select jumpers ŠŠ 1 x CPU cooler LED strip/RGB LED strip header ŠŠ 1 x RGB (RGBW) LED strip header ŠŠ 2 x M.2 Socket 3 connectors ŠŠ 6 x SATA 6Gb/s connectors ŠŠ 1 x front panel header ŠŠ 1 x front panel audio header ŠŠ 1 x S/PDIF Out header ŠŠ 1 x USB Type-C™ port, with USB 3.1 Gen 2 support ŠŠ 2 x USB 3.1 Gen 1 headers ŠŠ 2 x USB 2.0/1.1 headers ŠŠ 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S module only) ŠŠ 1 x Clear CMOS jumper ŠŠ 1 x temperature sensor header ŠŠ 4 x USB 2.0/1.1 ports ŠŠ 4 x USB 3.1 Gen 1 ports ŠŠ 1 x USB Type-C™ port, with USB 3.1 Gen 2 support ŠŠ 1 x USB 3.1 Gen 2 Type-A port (red) ŠŠ 1 x HDMI port ŠŠ 1 x RJ-45 port ŠŠ 1 x optical S/PDIF Out connector ŠŠ 5 x audio jacks ŠŠ iTE® I/O Controller Chip ŠŠ Voltage detection ŠŠ Temperature detection ŠŠ Fan speed detection ŠŠ Water cooling flow rate detection ŠŠ Overheating warning ŠŠ Fan fail warning ŠŠ Fan speed control * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. - 7 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

USB
²
CPU:
-
4 x USB 3.1 Gen 1 ports on the back panel
²
Chipset:
-
1 x USB Type-C
port with USB 3.1 Gen 2 support, available through the
internal USB header
-
4 x USB 3.1 Gen 1 ports available through the internal USB headers
-
8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
Connectors
²
1 x 24-pin ATX main power connector
²
1 x 8-pin ATX 12V power connector
²
1 x CPU fan header
²
1 x water cooling CPU fan header
²
4 x system fan headers
²
2 x system fan/water cooling pump headers
²
2 x digital LED strip headers
²
2 x digital LED strip power select jumpers
²
1 x CPU cooler LED strip/RGB LED strip header
²
1 x RGB (RGBW) LED strip header
²
2 x M.2 Socket 3 connectors
²
6 x SATA 6Gb/s connectors
²
1 x front panel header
²
1 x front panel audio header
²
1 x S/PDIF Out header
²
1 x USB Type-C
port, with USB 3.1 Gen 2 support
²
2 x USB 3.1 Gen 1 headers
²
2 x USB 2.0/1.1 headers
²
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
²
1 x Clear CMOS jumper
²
1 x temperature sensor header
Back Panel
Connectors
²
4 x USB 2.0/1.1 ports
²
4 x USB 3.1 Gen 1 ports
²
1 x USB Type-C
port, with USB 3.1 Gen 2 support
²
1 x USB 3.1 Gen 2 Type-A port (red)
²
1 x HDMI port
²
1 x RJ-45 port
²
1 x optical S/PDIF Out connector
²
5 x audio jacks
I/O Controller
²
iTE
®
I/O Controller Chip
Hardware
Monitor
²
Voltage detection
²
Temperature detection
²
Fan speed detection
²
Water cooling flow rate detection
²
Overheating warning
²
Fan fail warning
²
Fan speed control
*
Whether the fan (pump) speed control function is supported will depend on the fan
(pump) you install.
- 7 -