Gigabyte Z790 AORUS ELITE X BIOS Setup Guide - Page 15

&& Realtime Memory Frequency Enables or disables the Realtime Memory Frequency feature, which allows manual switching between default SPD profile frequency and selected XMP profile frequency. Auto lets the BIOS automatically configure this setting. This item is configurable only when Dynamic Memory Boost is set to Disabled. && Realtime Memory Timing Allows you to fine-tune memory timings after the BIOS stage. && Memory Enhancement Settings Allows the system to operate at different performance levels. && Memory Channel Detection Message Allows you to determine whether to show an alert message when the memory is not installed in the optimal memory channel. && Retry Loop Count Allows you to set the number of times for memory self-test if memory overclocking fails. ƒƒ SPD Info Displays information on the installed memory. ƒƒ SPD Setup Allows you to configure memory parameters for the installed memory or save the settings as a profile. ƒƒ Memory Channels Timings dd Channels Standard Timing Control, Channels Advanced Timing Control, Channels Misc Timing Control These sections provide memory timing settings. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values. ƒƒ Memory Training Settings Allows you to adjust memory training settings. ƒƒ CPU/PCH Voltage Control/DRAM Voltage Control These items allow you to adjust the CPU, Chipset, and memory voltages. The displayed items and values may vary depending on motherboard chipset and the CPU used. - 15 -