Gigabyte Z790 AORUS ELITE X BIOS Setup Guide - Page 21

USB Configuration, Port 60/64 Emulation, Network Stack Configuration, IPv4 PXE Support

Page 21 highlights

&& Reserved PMemory Allows you to set the reserved prefetchable memory for this root bridge. && PMemory Alignment Allows you to set prefetchable memory alignment. && Reserved I/O Allows you to set reserved I/O for DTBT Controller 0. ƒƒ USB Configuration && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. && USB Mass Storage Driver Support Enables or disables support for USB storage devices. && Port 60/64 Emulation Enables or disables support for USB storage devices. && Mass Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. ƒƒ Network Stack Configuration && Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. && IPv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled. && IPv4 HTTP Support Enables or disables HTTP boot support for IPv4. This item is configurable only when Network Stack is enabled. && IPv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled. && IPv6 HTTP Support Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is enabled. && PXE boot wait time Allows you to configure how long to wait before you can press to abort the PXE boot. This item is configurable only when Network Stack is enabled. && Media detect count Allows you to set the number of times to check the presence of media. This item is configurable only when Network Stack is enabled. ƒƒ NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. - 21 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

- 21 -
&
Reserved PMemory
Allows you to set the reserved prefetchable memory for this root bridge.
&
PMemory Alignment
Allows you to set prefetchable memory alignment.
&
Reserved I/O
Allows you to set reserved I/O for DTBT Controller 0.
±
USB Configuration
&
Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS.
&
XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support.
&
USB Mass Storage Driver Support
Enables or disables support for USB storage devices.
&
Port 60/64 Emulation
Enables or disables support for USB storage devices.
&
Mass Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
±
Network Stack Configuration
&
Network Stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
the Windows Deployment Services server.
&
IPv4 PXE Support
Enables or disables IPv4 PXE Support. This item is configurable only when
Network Stack
is enabled.
&
IPv4 HTTP Support
Enables or disables HTTP boot support for IPv4. This item is configurable only when
Network Stack
is
enabled.
&
IPv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when
Network Stack
is enabled.
&
IPv6 HTTP Support
Enables or disables HTTP boot support for IPv6. This item is configurable only when
Network Stack
is
enabled.
&
PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is
configurable only when
Network Stack
is enabled.
&
Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network Stack
is enabled.
±
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.