Haier EB-3190EC User Manual - Page 3

English

Page 3 highlights

English Instruction for use Do not put microwave oven in humid or high-temperature environment. Do not touch the upper part of the shell and the outer screen of the door . It may cause scalding. Do not run the microwave oven without load. It may damage the microwave oven. Do not use metal container to cook with microwave oven. It may cause igniting phenomenon. After long time cooking, the cavity is under high temperature. It is suggested to wait for some time to cool it down before next usage. During maintenance, be sure to switch off the power supply . To decompose the shell of the oven, be sure to have it done by professional technicians. The inner components are electrified, and may cause electric shock. The door seal and all of the relative parts shall be cleaned with soap liquor once each week to keep the cavity clean. If the power cord is damaged, only the sellers or professional technicians authorized by the manu- facturer can make maintenance to avoid any electric shock danger. If you use cook utensils not recommended by us, be sure to watch out for the cooking proceeding in the microwave oven. Small amount of food require shorter cooking or heating time .If normal times are allowed they overheat and burn. _ If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly _ qualified persons in order to avoid a hazard. ALWAYS use oven gloves when removing a dish from the oven. Some dishes absorb microwaves _ and heat is always transferred from the food to the dish. The dishes are therefore hot. Stand at arm s length from the oven when opening the door, Oven casing and door will get hot during convection and combination cooking, the hot air or steam release may cause scalding. Electricity schematic diagram (The fingure does not suit the CE/GS certification) E Sensor 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

The door seal and all of the relative parts shall be cleaned with soap liquor once each week to keep
the cavity clean.
If the power cord is damaged, only the sellers or professional technicians authorized by the manu-
facturer can make maintenance to avoid any electric shock danger.
If you use cook utensils not recommended by us, be sure to watch out for the cooking proceeding in
the microwave oven.
Small amount of food require shorter cooking or heating time .If normal times are allowed they
overheat and burn.
Do not put microwave oven in humid or high-temperature environment.
Do not touch the upper part of the shell and the outer screen of the door . It may cause scalding.
Do not run the microwave oven without load. It may damage the microwave oven.
Do not use metal container to cook with microwave oven. It may cause igniting phenomenon.
After long time cooking, the cavity is under high temperature. It is suggested to wait for some time
to cool it down before next usage.
During maintenance, be sure to switch off the power supply . To decompose the shell of the oven, be
sure to have it done by professional technicians. The inner components are electrified, and may
cause electric shock.
_
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
ALWAYS
use oven gloves when removing a dish from the oven. Some dishes absorb microwaves
and heat is always transferred from the food to the dish. The dishes are therefore hot.
Stand at arm
s
length from the oven when opening the door, Oven casing and door will get hot during
convection and combination cooking, the hot air or steam release may cause scalding.
_
_
English
Instruction for use
27
Electricity schematic diagram
Sensor
E
(The fingure does not suit the CE/GS certification)