Haier HBF05EAVS HBF05E Manual - Page 5

English Unpacking and Accessories Inventory 1. Remove all packing materials. This includes the foam base and all adhesive tape holding the accessories both inside and outside. Slide out and remove the plastic or foam guard used to secure the compressor during shipping. 2. Inspect and remove any remaining packaging, tape or printed materials before turning on the beer dispenser. Note: Allow the beer dispenser to stand in an upright position for 2 hours before turning on the power. Check all supplied accessories in the carton to be sure that all pieces are present and in good condition. A checklist of accessories is listed below for your reference. If you find any accessories that are not in good condition or are missing, please contact our customer service department for assistance. Our Toll-Free number is 1-877-337-3639. 1 Beer Tap Including: 1 Gasket for the Beer Tap 1 Washer for Connection to the Keg Coupler 1 CO2 Regulator 1 CO2 Cylinder 1 Keg Coupler 1 Cleaning Kit 1 CO2 Air Line 2 Hose Clamps 1 CO2 Cylinder Retainer 1 Guardrail 1 Drip Tray 4 Casters 1 Wrench 4 Large Phillips-Head Screws 8 Small Phillips-Head Screws 2 Retainer Fixing Screws 2 Wire Shelves 4 Support Pins 4