Haier HBF05EAVS HBF05E Manual - Page 9

Warning

Get Haier HBF05EAVS - Brewmaster - Virtual Steel PDF manuals and user guides
UPC - 688057301426
View all Haier HBF05EAVS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Installing the Guardrail Follow the steps below to install the guardrail on the worktop. 1. Place the guardrail on top of the cabinet. 2. Align all holes of the guardrail with the holes of the cabinet. 3. Secure the guardrail to the cabinet with eight small Phillips-Head screws. English Installing the CO2 Regulator and CO2 Cylinder Follow the steps below to safely install the CO2 regulator and CO2 cylinder. You must read and understand the following procedures for CO2 cylinders before installation. Note: Your CO2 cylinder is shipped empty to avoid any possible accidents during transportation. When you purchase the first keg of beer, have your beer distributor fill the CO2 cylinder. 1. Install the CO2 air line hose to the regulator by attaching one end of the red air line hose to the hose barb connection on the CO2 regulator. Secure the hose by using one of the two self-locking black plastic snap-on clamps. Use pliers to snap the clamp on tightly to ensure that there are no leaks. CO 2 Regulator Connect to the CO2 Cylinder 2. Attach the CO2 regulator to the CO2 cylinder by screwing the regulator nut onto the cylinder valve and tightening with an adjustable wrench. Clamp 3. Remove the nut from the retainer bolt. Use two retainer fixing screws to secure the retainer to the holes on the back of the cylinder. 4. Slide the cylinder through the retainer and place it in the cabinet. Then tighten the retainer nut. Shut-Off Valve Connect to the CO 2 Air Line GAS Retainer CO2 Cylinder CO2 WARNING! CO2 can be dangerous! CO2 cylinders contain high-pressured gas, which can be hazardous if handled improperly. They must be handled with care. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
8
English
Installing the Guardrail
Follow the steps below to install the guardrail on
the worktop.
1. Place the guardrail on top of the cabinet.
2. Align all holes of the guardrail with the holes
of the cabinet.
3. Secure the guardrail to the cabinet with eight
small Phillips-Head screws.
Installing the CO
2
Regulator and CO
2
Cylinder
Follow the steps below to safely install the CO
2
regulator and CO
2
cylinder.
You
must read and understand the following procedures for CO
2
cylinders before
installation.
Note:
Your CO
2
cylinder is shipped empty to avoid any possible accidents during
transportation. When you purchase the first keg of beer, have your beer
distributor fill the CO
2
cylinder.
1. Install the CO
2
air line hose to the regulator by attaching one end of the red air
line hose to the hose barb connection on the
CO
2
regulator. Secure the hose by using one
of the two self-locking black plastic snap-on
clamps.
Use pliers to snap the clamp on
tightly to ensure that there are no leaks.
2. Attach the CO
2
regulator to the CO
2
cylinder by screwing the regulator nut onto
the cylinder valve and tightening with an
adjustable wrench.
3. Remove the nut from the retainer bolt.
Use two retainer fixing screws to secure the
retainer to the holes on the back of the
cylinder.
4. Slide the cylinder through the retainer and
place it in the cabinet. Then tighten the
retainer nut.
WARNING!
CO
2
can be dangerous! CO
2
cylinders contain high-pressured gas, which
can be hazardous if handled improperly. They must be handled with care.
CO2 Cylinder
CO
2
GAS
CO
2
Regulator
Connect to the CO
2
Air Line
Clamp
Shut-Off
Valve
Retainer
Connect to the CO
2
Cylinder