Haier HCH2100ACS Installation Instructions - Page 13

Electrical Shock Hazard

Get Haier HCH2100ACS PDF manuals and user guides View all Haier HCH2100ACS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove the ground prong from the power cord plug. Do not use an adapter. Do not use an extension cord. Failure to do so can result in death, re or electrical shock. 1. Before mounting the range hood, plug the range hood into a grounded 3 prong outlet to test all functions for proper operation. • Blower works at all speeds. • Lights turn on and off. • The damper flaps open when the blower is on. 2. Using two or more people, hang range hood on two mounting screws through the mounting slots on back of hood. a b b a Mounting Screws b Mounting Slots 3. Remove the grease filter. See "Range Hood Care" section. 4. Level the range hood and tighten upper mounting screws. 5. Install two 5 x 45 mm lower mounting screws and tighten. 6. Fit vent system over the exhaust outlet. 7. Seal connection with clamps. 8. Check that back draft dampers work properly. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
11
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
1.
Before mounting the range hood, plug the range hood into a grounded 3 prong
outlet to test all functions for proper operation.
•
Blower works at all speeds.
•
Lights turn on and off.
•
The damper flaps open when the blower is on.
2.
Using two or more people, hang range hood on two mounting screws through
the mounting slots on back of hood.
a
b
b
a
Mounting Screws
b
Mounting Slots
3.
Remove the grease filter. See “Range Hood Care” section.
4.
Level the range hood and tighten upper mounting screws.
5.
Install two 5 x 45 mm lower mounting screws and tighten.
6.
Fit vent system over the exhaust outlet.
7.
Seal connection with clamps.
8.
Check that back draft dampers work properly.