Haier HCH2100ACS Installation Instructions - Page 20

Replacing A Lamp

Get Haier HCH2100ACS PDF manuals and user guides View all Haier HCH2100ACS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

REPLACING A LAMP WARNING Electrical Shock Hazard Make sure the range hood lights are cool and power to the range hood has been turned off before replacing the light bulb(s). The lenses must be in place when using the range hood. The lenses serve to protect the light bulb from breaking. The lenses are made of glass. Handle carefully to avoid breakage. Failure to do so could result in death, electric shock, cuts or burns. Turn off the range hood light to allow the bulb to cool. To avoid damage or decreasing the life of the new bulb, do not touch bulb with bare fingers. Wear cotton gloves or use a tissue when replacing the light bulb. If a new bulb does not illuminate, first check that it is inserted correctly in the socket before calling service. 1. Disconnect power. 2. Insert a flat-blade screwdriver, and gently pry off the light shield. a a Light Shield 3. Gently pull the burned out bulb from the socket. 4. Avoiding contact with skin, insert a new halogen bulb of the same size, shape and wattage into the socket. a a Bulb 5. Align the three tabs of the light shield with the holes in the opening and push up to snap it in place. 6. Reconnect power. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
18
REPLACING A LAMP
WARNING
Electrical Shock Hazard
Make sure the range hood lights are cool and power to the range hood
has been turned off before replacing the light bulb(s).
The lenses must be in place when using the range hood. The lenses
serve to protect the light bulb from breaking.
The lenses are made of glass. Handle carefully to avoid breakage.
Failure to do so could result in death, electric shock, cuts or burns.
Turn off the range hood light to allow the bulb to cool. To avoid damage or
decreasing the life of the new bulb, do not touch bulb with bare fingers. Wear cotton
gloves or use a tissue when replacing the light bulb.
If a new bulb does not illuminate, first check that it is inserted correctly in the socket
before calling service.
1.
Disconnect power.
2.
Insert a flat-blade screwdriver, and gently pry off the light shield.
a
a
Light Shield
3.
Gently pull the burned out bulb from the socket.
4.
Avoiding contact with skin, insert a new halogen bulb of the same size, shape
and wattage into the socket.
a
a
Bulb
5.
Align the three tabs of the light shield with the holes in the opening and push up
to snap it in place.
6.
Reconnect power.