Haier HL42XZK42 User Manual - Page 30

Universal Remote Control F Press POWER key, If the device responds, no further programming is required. If the device does not respond repeat steps 1 through 5. G After searching the entire data base, this mode will be automatically exited and led will blink for 3 times. The codeset is not saved to EEPROM. In automatic scan mode, press any key other than ENTER key will exit without programming. Display mode A Choose the device you wish to program. B To enter display mode, while press and holding ENTER key, press the INPUT key and device LED will be ON, keep the status for about 3 seconds and the LED will blink, indicating that the Controller is ready for programming, then release both keys. C Sequence press 9, 8, 0 to enter display mode. D Press digit 1 key to get the first digit of current codeset. For example, if the first digit of codeset is 1, so then led will blink once and remains OFF. Digit "0" in codeset will not be displayed. Blink Freq is 1 HZ. E Press digit 2 key to get the second digit of current codeset. For example, if the second digit of codeset is 3, so then led will blink three times and remains OFF. Blink Freq is 1 HZ. F Press digit 3 key to get the third digit of current codeset. Blink Freq is 1 HZ. G Only digit 1, 2, 3 are valid in this mode. And the sequence is not fixed. Controller will not send out data in this mode if user presses any keys other than digit 1, 2, 3, or no key was pressed in 30 seconds, display mode is ended. Punch-Through Features The Controller provides two punch-through features that allow users to control TV volume and DVD or VCR operation while the Controller is in another device mode control certain features of another device. YYVolume Punch-Through The TV Volume/Mute punch-through feature allows you to control the volume and mute function of your TV while the Controller is in another device mode. The feature is applicable for all devices and brands that do not use the volume control buttons for other purposes. YYTransport Key Punch-Through The DVD or VCR transport key punch through feature lets you control the PLAY, STOP, PAUSE, REWIND, FF and RECORD functions of your DVD or VCR while the Control operates in other modes. The feature is applicable for all devices and brands that do not use the transport keys for other purposes. Fast Programming Haier default TV codeset Press and holding the ENTER key and then press POWER key for 3 seconds, the LED will blink 3 times and turn off, default Haier codeset (001) will be programmed to the control. Remote Control Codes TV NO. Brand 1 Haier 2 Abex 3 Acer 4 Addison 5 Admiral 6 Advent 7 Adventura 8 Aiko 9 Aiwa 10 Akai 11 Albatron 12 Alleron 13 America Action 14 Ampro 15 Amtron 16 Anam 17 Anam National 18 AOC 19 Apex 20 Archos 21 Astar 22 Audiovox 23 Aventura 24 Axion 25 Bang & Olufsen 26 Baur 27 Belcor 28 Bell & Howell 29 Benq 30 Bradford 31 Brillian 32 Brockwood 33 Broksonic 34 byd:sign 35 Candle 36 Carnivale 37 Carver 38 CCE 39 Celebrity 40 Celera 41 Centurion 42 Changhong 43 Ching Tai 44 Chun Yun 45 Chung Hsin 46 Citizen 47 Clarion 48 Coby 49 Colortyme 50 Colt 51 Commercial Solutions 52 Concerto 53 Contec Code 001 002 003 004 005 006 007 008 009 010 240 241 297 307 355 077 267 333 057 078 334 338 324 079 066 333 165 038 058 258 271 279 331 350 321 325 068 335 323 067 335 059 067 060 061 062 222 331 349 350 353 092 135 151 195 339 308 259 067 189 191 207 256 333 335 337 053 280 345 346 058 060 349 057 245 246 284 329 067 335 342 060 349 197 335 338 310 060 062 063 079 331 350 331 350 055 320 239 351 058 339 064 339 333 333 335 361 374 335 364 060 062 063 066 067 074 076 331 333 350 352 354 380 335 210 060 062 377 332 060 062 335 EN-29 Haier LCD HDTV