Haier HLC24XLPW2a User Manual
Haier HLC24XLPW2a Manual
 |
View all Haier HLC24XLPW2a manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier HLC24XLPW2a manual content summary:
- Haier HLC24XLPW2a | User Manual - Page 1
Converter to receive over the air digital programming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing video games). For more information, call the FCC at 1-888-CALL-FCC (1-888 - Haier HLC24XLPW2a | User Manual - Page 2
exclamation point within on equilateral triangle to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases - Haier HLC24XLPW2a | User Manual - Page 3
TV please read this manual thoroughly.This manual with the instructions, may cause power cord, if any, must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for any radio or TV qualified service person should remove the cover or attempt to service this - Haier HLC24XLPW2a | User Manual - Page 4
other flammable materials. Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display. Call service personnel to clean the internal part of the TV once a year. Don't place the TV in confined spaces or in a box when using - Haier HLC24XLPW2a | User Manual - Page 5
. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. The TV should - Haier HLC24XLPW2a | User Manual - Page 6
risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 19. only TVs should continue to work as before to receiver low power, Class A or translator television stations an with cable and satellite TV services, - Haier HLC24XLPW2a | User Manual - Page 7
of the mats and supporting structure grounding of SERVICE EQUIPMENT GROUND CLAMPS ANTENNA DISCHARGE UNIT GROUNDING CONDUCTORS POWER SERVICE the power plug to the wall outlet socket after connecting the TV to appliance coupler shall remain readily operable. 29. Where the MAINS plug or an appliance - Haier HLC24XLPW2a | User Manual - Page 8
SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product.This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number.They are on the label on the back - Haier HLC24XLPW2a | User Manual - Page 9
GUIDE 12 OPERATING INSTRUCTIONS 14 TO USE THE BACK PANEL CONTROL 14 TO USE THE REMOTE CONTROL 15 TO USE THE MENUS 16 CHANNEL MENU 16 VIDEO MENU 17 AUDIO MENU 18 FEATURE MENU 18 VGA MENU 23 TIPS 23 DVD OPERATION 25 PRODUCT SPECIFICATIONS 30 BEFORE CALLING FOR SERVICE - Haier HLC24XLPW2a | User Manual - Page 10
warranty does not cover user abuse or improper installations. ATTACHING THE BASE IMPORTANT: The Base of the HDTV must be assembled prior to usage. 1. Place TV unit face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the HDTV. 2. Carefully align and insert the - Haier HLC24XLPW2a | User Manual - Page 11
English Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. 3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). HTR- - Haier HLC24XLPW2a | User Manual - Page 12
USB HDMI 2 PERIPHERAL CONNECTION GUIDE 12 - Haier HLC24XLPW2a | User Manual - Page 13
audio (L) inputs. 5. ANTENNA/CABLE DIGITAL/ANALOG - Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for Digital TV. 6. SPDIF (Optical Digital Audio Out) - When a digital audio signal is associated with the input selected for viewing, the digital audio will be available - Haier HLC24XLPW2a | User Manual - Page 14
OPERATING INSTRUCTIONS TO USE THE BACK PANEL CONTROL 1 1 2 2 VOL 3 3 4 CH 5 6 MENU 7 INPUT POWER Press to turn on / off (standby) the TV set. 1. DVD Previous/Next Chapter VOL + 2. Press to increase the volume. DVD Stop/Play/Pause VOL 3. Press to decrease the volume. DVD Open/Close 4. - Haier HLC24XLPW2a | User Manual - Page 15
TO USE THE REMOTE CONTROL Power Press to power ON/OFF (standby) TV. Note:The TV is never completely powered off unless physically unplugged. GUIDE Press to display the Electronic Program Guide. CCD Press repeatedly to change the closed caption type as CC On / CC Off / CC On with mute. MTS/SAP Press - Haier HLC24XLPW2a | User Manual - Page 16
the Air (antenna) or Cable (CATV). 2. Channel Strength: Show the intensity of the received DTV signal. 3. Auto CH Search: Automatically scan all NTSC / ATSC TV channels and then store in the channel table. During the channel scan process, the OSD will display the number of channels which have been - Haier HLC24XLPW2a | User Manual - Page 17
to the selected channel. 6. Channel Labels: Show the NTSC / ATSC TV Channel Labels menu for user modifying channel labels specifically. 7. FAV Channel , Standard, Eco, Movie, or Personal (In VGA mode only support Standard and Personal). 2. Brightness: Video brightness adjustment, the tuning range - Haier HLC24XLPW2a | User Manual - Page 18
the audio language setting on ATSC TV programs.The number of the supported audio languages depends on the ATSC TV programs. (English / Spanish / Daylight Savings. [Time Mode] - Choosing Manual for the Time Mode, you can set Year, Month, Day, and Time manually. By choosing Auto, you can set the - Haier HLC24XLPW2a | User Manual - Page 19
menu, user has to key in the password first. Enter the Parental Lock item, then the user can modify the restricted table about MPAA or TV Rating respectively. After exiting the main menu, the parental control function is enabled.The blocked channels or source signals can be unlocked by entering the - Haier HLC24XLPW2a | User Manual - Page 20
Digital Captions: Select digital caption options. (SERVICE 1-6) Note:This feature is only available in Digital TV (ATSC) mode. 8. Digital Captions digital TV that stored in a USB storage device. Note: File number is limited to 1000 files. JPEG sizes are limited as followed: HLC24XLP2/ HLC24XLPW2: - Haier HLC24XLPW2a | User Manual - Page 21
player interface only. After setting to On, the backlight will be turnedoff automatically after 10 seconds if no key is pressed. Press any key but POWER key, the TV backlight will turn on again. English - Haier HLC24XLPW2a | User Manual - Page 22
• Format process will take at least 2 minutes. Please do not turn off power or remove USB disk during formatting. • During formatting, a speed test will be on the USB disk. If it fails, it means the USB disk may not support the Time Shift functions. • Start Time Shift Recording: Select to start the - Haier HLC24XLPW2a | User Manual - Page 23
not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth - Haier HLC24XLPW2a | User Manual - Page 24
antenna. • Increase the separation between the equipment and the TV. • Connect the equipment into wall power outlet on a circuit different from that to which the , if not installed and used in accordance with the instructions, may all requirements of the Canadian Interference-Causing Equipment - Haier HLC24XLPW2a | User Manual - Page 25
press the PLAY/PAUSE button to start.You may also press the digit buttons to 1. Press the STOP button to go to stop mode, the TV screen will show the start logo.With some discs, such as DVD or CDs, the player can resume playback from the point where it was - Haier HLC24XLPW2a | User Manual - Page 26
ordinal number of this language; "XX" indicates total number of languages. "XXXXXX" means the language of country. (The supported number of language varies on each disc.) This feature supports up to 32 maximum language numbers. REPEAT Press the REPEAT button, and the Chapter repeat will be displayed - Haier HLC24XLPW2a | User Manual - Page 27
AUDIO Press the D.AUDIO button to change the audio mode/language. For example, Audio 1/2: AC3 2ch English, Audio 2/2: AC3 5.1ch English. (The supported number of audio mode/language varies on each disc.) Special Function Playback JPEG DISC PLAYBACK When a disc containing standard JPEG picture files - Haier HLC24XLPW2a | User Manual - Page 28
be an animated picture of a DVD on the screen whenever the DVD player is idle for more than 4 minutes. HDCD Choose the sampling frequencies for the digital filter.The higher the sampling frequencies are, the clearer the audio quality is. Choose 44.1K or 88.2K for HDCD playback. Last Memory This - Haier HLC24XLPW2a | User Manual - Page 29
English Playable Discs The following discs can be played: DISCS DVD VIDEO LABEL AUDIO CD HDCD JPEG KODAK CD CD-R CD-RW CD+G CONTENTS Audio + Video (moving picture) Audio Audio Video (picture) Video (picture) Audio or Video (moving picture) Audio or Video (moving picture) Audio (picture) - Haier HLC24XLPW2a | User Manual - Page 30
ATSC standard (8-VSB, Clear-QAM) VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mid band (A - 8 through A - 1, A through I), Super band (J 60Hz For HLC24XLP2 / HLC24XLPW2 only. Recommended: HLC24XLP2 / HLC24XLPW2: 1920x1080@60Hz Component Video and L/R Audio input: Supported resolution: 4 80i@59 - Haier HLC24XLPW2a | User Manual - Page 31
HLC24XLP2 HLC24XLPW2 Side POWER Power Consumption 65W Standby - Haier HLC24XLPW2a | User Manual - Page 32
's AC power cord is plugged into the mains socket. • Unplug the TV, wait for 60 seconds.Then reinsert plug into the mains socket and turn on the TV again. No picture • Check antenna connections at the rear of the TV to see if it is properly connected to the TV. • Possible broadcast station trouble - Haier HLC24XLPW2a | User Manual - Page 33
and offer sound connection options. Menu An on-screen listing of features shown on the TV screen is made available for user adjustments. MPAA Motion Picture Association of America Multichannel Television Sound (MTS) The broadcasting standard, which allows stereo sounds to be transmitted with - Haier HLC24XLPW2a | User Manual - Page 34
attempted repairs performed by anyone other than an authorized service center or dealer; nor shall Haier be liable, or in any way responsible for HLC24XLPW2 1 year parts, 90 days labor. Additional items excluded from warranty coverage: non-rechargeable batteries. What to do to obtain service - Haier HLC24XLPW2a | User Manual - Page 35
- Haier HLC24XLPW2a | User Manual - Page 36
R 01 0090506421A
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
1
DIGITAL TELEVISION TRANSITION NOTICE
This device contains a digital television tuner, so it should receive digital over the air TV
programming, with a suitable antenna, after the end of full-power analog TV broadcasting
in the United States on June 12 2009. Some older television receivers, if they rely on a
TV antenna, will need a TV Converter to receive over the air digital programming, but
should continue to work as before for other purposes (e.g., for watching low-power
TV stations still broadcasting in analog, watching pre-recorded movies, or playing video
games).
For more information,
call the FCC at 1-888-CALL-FCC (1-888-225-5322)
or see www.DTV.gov.
For information on the TV Converter program, and on government coupons that may be
used toward the purchase of one, see www.dtv2009.gov,
or call the NTIA at 1-888-DTV-2009.
AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN
DIGITAL
Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá recibir
una programación digital televisada por aire, con una antena adecuada, cuando se
terminará la transmisión de alta potencia de la televisión analógica en los Estados Unidos
el 12 de Junio de 2009. Ciertos receptores de televisión antiguos, si dependen de una
antena de TV, necesitarán un conversor de TV para recibir por el aire una programación
digital, pero seguirán funcionando como antes para otros usos (por ejemplo para ver
emisoras de TV de baja potencia que todavía transmiten en analógico, para ver películas
pregrabadas, o para utilizar sus videojuegos).
Para obtener más información,
llame FCC 1-888-CALL-FCC (1-888-225-5322)
o refiérase a www.DTV.gov.
Para toda información sobre el programa de conversores de TV, y acerca de los cupones
del gobierno que se pueden usar para comprarlos, refiérase a www.dtv2009.gov,
o llame al NTIA al 1-888-DTV-2009.
h
s
i
l
g
n
E